Maximum depth. Minimum footprint. The Omnitub Sheer 900 is a full 600 mm deep soaking tub on a 900 × 700 mm footprint — the deep soak that fits where nothing else can. Handmade to order in Somerset, England. The deep soak that doesn't compromise Most small tubs save space by taking it from you — shallower water, a sloped inside, less room to sink into. Sheer does the opposite. Where a normal tub has wide flat rims that eat into the well, Sheer runs just three slim 25 mm flanges and a single 100 mm flange at the tap end, on a 25 mm taper — so the inside is absolutely maximised. The walls drop almost vertical over the full 600 mm depth, holding the volume where you sit: an internal opening of 775 × 650 mm and a true 600 mm of immersion on a slim 700 mm-wide base. Slim on the floor, vast inside — the inverse of a space-saving tub, which sacrifices the water; Sheer sacrifices nothing. Behind the name — Sheer The name says everything the tub does. Sheer depth — a full 600 mm of uncompromising, shoulder-deep immersion. Sheer sides — near-vertical walls that drop like a cliff face, holding the water around you instead of sloping it away. And sheer simplicity — clean, pure lines, hand-finished by craftspeople in Somerset. It took a real design breakthrough to put this much soak on a 700 mm footprint, and the Sheer name is our shorthand for it: maximum depth, minimum footprint, nothing wasted. How deep it really is 600 mm internal soaking depth — full-body, shoulder-deep immersion Near-vertical walls (25 mm taper) — the water sits around you, not under a slope Far more usable volume than a conventional sloped tub of the same footprint Where it fits At just 700 mm wide, the Sheer 900 is built for the rooms a conventional deep tub won't go: compact family bathrooms, ensuites, loft conversions, period homes and apartments. It passes through standard doorways and sits against a single wall — undermounted, overmounted, inset, part-submerged or freestanding on its feet. With our insulation upgrade it is equally at home outdoors or as a cold plunge. Dimensions External footprint: 900 × 700 mm · overall height 625 mm (rim to underside, excluding feet) Internal opening: 775 × 650 mm · base 725 × 600 mm Internal width: 650 mm at the rim → 600 mm at the base Flanges: 100 mm at the tap / waste end, 25 mm on the other three sides Waste: centred on the width, 215 mm in from the tap end The full technical drawing — every dimension in mm, cm and inches — is on the spec sheet below. Built to last a lifetime Standard 7-layer Omnigel built-up system — rigid, warm to the touch, no flex and no cold shock Colour runs right through the Omnigel, so it can never chip or fade off the surface Insulation upgrade available (25–100 mm) for outdoor, commercial and cold-plunge use — holds heat, or cold, for hours 30-year manufacturer warranty — built to outlast the room around it Net weight ~18.3 kg — light to handle; the load is taken on the base, never the flange Made in your colour Every Sheer tub is made to order in the colour you choose — White, any RAL or BS 4800 reference, or your own paint-sample match. The colour is manufactured into the material, never sprayed on top. Use the colour selector above to preview your finish. Delivery & ordering Free UK Mainland Named Day Delivery on a day that suits you — England, Scotland and Wales. Northern Ireland and the UK islands are a flat £120 inc. VAT. International shipping to 220+ countries with live rates at checkout. Every tub is handmade to order in Somerset with 100% payment taken at order — we then build it and deliver to the day you choose. Why Omnitub Omnitub has hand-built deep soaking tubs in Somerset, England since 2005 — proudly British made, by people, not machines. Sheer is what happens when that craftsmanship meets cutting-edge design: we re-engineered the wall geometry from the ground up to hold near-vertical sides, so a tub this deep finally fits a room this size. Every one is hand-laid from our proprietary 7-layer Omnigel built-up system, finished by hand, and backed by a 30-year warranty. The Sheer collection grows to 1700 × 700 mm — talk to the maker if you would like a longer size made to order. Finish — Hand-Polished or Matte Every Omnitub is hand-polished to a deep, reflective finish as standard — a step above a sprayed gloss, with the colour cast right through the Omnigel rather than painted on. Prefer a softer, contemporary look? Choose Matte: a separate hand-finishing process applied after the polished build, giving a fine, low-sheen surface with the colour still cast through the Omnigel. As an additional hand-finishing stage, Matte adds around 5 working days to your build and 25% to the price. You choose your finish — Hand-Polished or Matte — inside the OmniStudio, alongside your colour, waste and size. Design yours in the OmniStudio → Handmade in Britain. This tub is handmade in our Somerset workshop — made by people, not production lines. The mould is handmade in our own factory, the shell is hand-laid layer by layer in our Omnigel built-up system, and every tub is inspected and signed off by the maker before it leaves. Verified Made in Britain — never imported.
Related
Related
Related
Related