Omnitub Solo Plus 1250 x 750 – 600mm Internal Depth The Omnitub Solo Plus 1250 x 750 is a compact deep soaking bathtub designed to extend internal bathing length without increasing overall width. Measuring 1250mm in external length and 750mm in width, it provides additional internal stretch compared to shorter compact models while maintaining a slim footprint suited to narrow bathroom layouts. With a true 600mm internal soaking depth, the Solo Plus delivers full-body immersion beyond conventional UK bath standards. Most standard baths provide approximately 400–450mm of internal water depth. The Solo Plus provides 600mm as standard, creating a deeper and more immersive bathing experience in a controlled external profile. Internally, the bath offers 1075mm of upper internal length and 600mm of internal width, with minimal taper between upper and lower internal dimensions. This ensures a consistent immersion profile and efficient use of space while preserving the depth-led Omnitub design philosophy. External Dimensions 1250mm Length 750mm Width 625mm Height Internal Soaking Depth 600mm The additional length makes the Solo Plus particularly suited to users who prefer more legroom while maintaining a narrow 750mm width. It works well in elongated en-suites, compact family bathrooms and projects where width is restricted but internal stretch is required. Constructed using Omnitub’s reinforced multi-layer structural system, the Solo Plus distributes all load through the base to ensure long-term rigidity and stability. The Omnigel built-up system construction provides strength without excessive weight, while the gel-coated finish is UV resistant, chemical resistant and easy to maintain. The tub is suitable for indoor, outdoor and commercial environments. The Solo Plus performs equally well as a traditional hot soaking bath or for cold immersion use. The material retains temperature effectively and water capacity is balanced to support deep soaking without unnecessary excess. Installation is flexible. The bath can be positioned freestanding or against walls depending on layout requirements. Tap holes and overflow can be drilled for you before dispatch via the studio, or by your installer on site, allowing full control over final configuration. A feet kit is supplied for elevation or flush placement. All white Omnitub Solo Plus models are in stock and available for fast UK dispatch. Bespoke colour finishes are available made-to-order in Somerset using the same structural construction and immersion specification. Worldwide shipping available. For projects requiring a 1250 x 750 deep soaking bathtub in the UK that combines extended internal length with a narrow footprint and true 600mm immersion depth, the Solo Plus delivers depth and proportion in balance. Depth is engineered in. Not added later. Finish — Hand-Polished or Matte Every Omnitub is hand-polished to a deep, reflective finish as standard — a step above a sprayed gloss, with the colour cast right through the Omnigel rather than painted on. Prefer a softer, contemporary look? Choose Matte: a separate hand-finishing process applied after the polished build, giving a fine, low-sheen surface with the colour still cast through the Omnigel. As an additional hand-finishing stage, Matte adds around 5 working days to your build and 25% to the price. You choose your finish — Hand-Polished or Matte — inside the OmniStudio, alongside your colour, waste and size. Design yours in the OmniStudio → Handmade in Britain. This tub is handmade in our Somerset workshop — made by people, not production lines. The mould is handmade in our own factory, the shell is hand-laid layer by layer in our Omnigel built-up system, and every tub is inspected and signed off by the maker before it leaves. Verified Made in Britain — never imported.
