DALI Control and Self-Test Modules for Fluorescent Luminaires Suitable for use with 3 or 4 cell batteries. 260mm (L) * 31mm (w) * 21.5 mm ( H ) Fixing Centres :256MM Does most lamps up to 36W in Dali OM34LPD LAMP BLF FOR OMpro MODULES LAMP OMpro 3/4 3 CELL 8W T5 20 10W TCT 18 13W TCT 15 14W T5 15 18W TCL 14 18W TCD 13 18W TCT 12 18W T8 13 LAMP OMpro 3/4 4 CELL 21W T5 14 24W TCL 12 24W TCF 12 26W TCD 11 26W TCT 11 28W 2D 12 OMpro The standard fluorescent ECK (Emergency Conversion Kits) comprise an OM high quality emergency lighting inverter module and the appropriate battery pack. Where Self-Test or fully interoperable DALI is required the OMpro module should be specified. The OMpro range offers a low-profile charger/inverter module with High temperature Nickel Cadmium or Nickel Metal Hydride batteries to suit the application. As with standard OM or OM/LP modules the OMpro inverter modules provide ‘total isolation’ i.e. 5-pole control (featuring full 4pole change-over of the lamp/gear connections plus a timed fifth pole to make & break the ballast live supply) ensuring successful operation with all ballast types including HF and dimming. OMpro DALI or SELF-TEST The OMpro module includes fully tested and approved DALI control/reporting. Fully integrated components and the latest software ensure that the OMpro equipment can be connected to any approved DALI control system. The integral software is constantly seeking DALI signals. When the mains supply is initially connected the modules operate in Self-Test mode in accordance with EN62034, automatically initiating a commissioning mode and then at random times commencing the weekly and annual test routine. The built-in real time intelligence ensures that faults such as charge failure, battery failure, etc. will be indicated immediately. Even while in Self-Test mode the OMpro module will continually be prepared for a DALI signal which, if received, will result in the Self-Test mode being disabled and the module reverting to the DALI protocol. This means that the OMpro module can be connected to a DALI system at anytime and the module can then be addressed and form part of the DALI installation immediately. The OMpro (modules) range consists of just two module types; the OMpro3/4 and the OMpro5/6. These modules can adapt to the number of cells in the battery to operate a wide range of lamps i.e. the OMpro3/4 when connected to a 3cell (3.6Volt) battery will operate 8W T5 lamps up to 18Watt T8 lamps while the same module when connected to a 4cell (4.8Volt) battery will operate lamps from 21Watt T5 to 28Watt 2D.2 ORDERING When ordering all of the necessary components i.e. module, battery, LED must be ordered separately. (See Ompro Order C
