Lectrotab is excited to introduce a new control incorporating features requested by boat owners to provide a user friendly control for a more enjoyable boating experience. One-Touch button to raise/lower tabs Automatic tab position return Completely sealed and waterproof Timing Port Bow Down Press and hold Stbd. Bow Up/Down Port Bow Up 4 - 12 seconds 8 sec. 8 LED's = 8 second actuator4 LED's = 4 second actuator Swap LEDs Starboard Bow Down Stbd. Bow Up/Down Port Bow Up LEDs opposite or same side as button press LEDs opposite 1 LED each side = LEDs opposite button press / 8 LEDS each side = same side Remember last tab setting Port Bow Up Stbd. Bow Up/Down Port Bow Up Standard retract / Remember last tab setting Standard 8 LEDs each side = Standard / 1 LED each side = Remember last tab setting Disable Auto Tab Retract All Up and All Down Simultaneously for 2 seconds or longer Stbd. Bow Up/Down Port Bow Up Enable / Disable Enable 1 LED each side = Auto Tab Retract Enable / 8 LEDs each side = Auto Tab Retract Disable Enter, Adjust and Exit Program Mode: Before entering program mode, 12vdc or 24vdc must be applied to Oval main power Power to AUX terminal must be OFF (Aux is typically connected to ignition key switch or aux switch) Press and hold button noted in Programming chart under column “Enter” for more than 2 seconds while switching the Aux terminal switch to ON at the same time Release the “Enter” button and press “STBD BOW UP or DOWN” button to change the value Press and hold “PORT BOW UP” for more than 2 seconds to exit program mode
