OpenMV Cam H7 - Machine Vision w/ MicroPython

Unmanned Tech Verified independent store

→

The OpenMV Cam is an all in one embedded machine vision developer platform. Build your own machine vision system faster using high level python scrips (based on MicroPythonn). Usin g python instead of C/C++ make is considerably easier to deal with complex data structures used with machine vision algorithms. Hoever this high level programming approach does not limit you as you can still have total control over the I/O pins via Python. Included with your OpenMV cam is a Python openMV IDE that lets you easily build and deploy your own algorithms and has many examples from face detection to optic flow. The IO pins of the openMV cam also let you add you own shield to extend the functionality. You can think of the openMV cam as an Arduino for machine vision. Key Features Build and deploy your machine vision algorithms quickly using the openMV python IDE Loads of example scripts to get your started, including face tracking, template matching, optic flow, MAVlink (to integrate with ardupilot systems) Lots of horsepower, powered by a 480 MHz MCU with 1MB of RAM and 2 MB of flash Expandable through the use of shields. Add WiFi, Bluetooth, thermopile etc.. Optional global shutter sensor for industrial applications. The OpenMV Cam hardware features: The ARM Cortex M7 processor running at 480 MHz with 1MB of RAM and 2 MB of flash. All I/O pins output 3.3V and are 5V tolerant. The processor has the following I/O interfaces: A full speed USB (12Mbs) interface to your computer. Your OpenMV Cam will appear as a Virtual COM Port and a USB Flash Drive when plugged in. A μSD Card socket capable of 100Mbs reads/writes which allows your OpenMV Cam to record video and easy pull machine vision assets off of the μSD card. A SPI bus that can run up to 100Mbs allowing you to easily stream image data off the system to either the LCD Shield, the WiFi Shield, or another microcontroller. An I2C Bus, CAN Bus, and an Asynchronous Serial Bus (TX/RX) for interfacing with other microcontrollers and sensors. A 12-bit ADC and a 12-bit DAC. Three I/O pins for servo control. Interrupts and PWM on all I/O pins (there are 10 I/O pins on the board). And, an RGB LED and two high power 850nm IR LEDs. A removable camera module system allowing the OpenMV Cam H7 to interface with different sensors: The OpenMV Cam H7 comes with a image sensor is capable of taking 640x480 8-bit Grayscale images or 640x480 16-bit RGB565 images at 60 FPS when the resolution is above 320x240 and 120 FPS when it is below. Most simple algorithms will run at above 60 FPS. Your image sensor comes with a 2.8mm lens on a standard M12 lens mount. If you want to use more specialized lenses with your image sensor you can easily buy and attach them yourself. For professional machine vision applications you can buy our Global Shutter Camera Module . For thermal machine vision applications you can buy our FLIR Lepton Adapter Module . A LiPo battery connector compatible with 3.7V LiPo batteries commonly sold online for hobbyist robotic applications. OpenMV Cam H7 Pinout Applications The OpenMV Cam can be used for the following things currently (more in the future): Frame Differencing You can use Frame Differencing on your OpenMV Cam to detect motion in a scene by looking at what's changed. Frame Differencing allows you to use your OpenMV Cam for security applications. Color Tracking You can use your OpenMV Cam to detect up to 16 colors at a time in an image (realistically you'd never want to find more than 4) and each color can have any number of distinct blobs. Your OpenMV Cam will then tell you the position, size, centroid, and orientation of each blob. Using color tracking your OpenMV Cam can be programmed to do things like tracking the sun, line following, target tracking, and much, much, more. Video demo " rel="noopener noreferrer" target="_blank" title="Color Tracking"> \n here\n \n .\n \n \n \n \n Marker Tracking\n \n \n You can use your OpenMV Cam to detect groups of colors instead of independent colors. This allows you to create color makers (2 or more color tags) which can be put on objects allowing your OpenMV Cam to understand what the tagged objects are. Video demo\n " rel="noopener noreferrer" target="_blank" title="Color Tracking"> here . Face Detection You can detect Faces with your OpenMV Cam (or any generic object). Your OpenMV Cam can process Haar Cascades to do generic object detection and comes with a built-in Frontal Face Cascade and Eye Haar Cascade to detect faces and eyes. Eye Tracking You can use Eye Tracking with your OpenMV Cam to detect someone's gaze. You can then, for example, use that to control a robot. Eye Tracking detects where the pupil is looking versus detecting if there's an eye in the image. Optical Flow You can use Optical Flow to detect translation of what your OpenMV Cam is looking at. For example, you can use Optical Flow on a quad-copter to determine how stable it is in the air. QR Code Detection/Decoding You can use the OpenMV Cam to read QR Codes in it's field of view. With QR Code Detection/Decoding you can make smart robots which can read labels in the environment. You can see our video on this feature here . Data Matrix Detection/Decoding The OpenMV Cam M7 can also detect and decode data matrix 2D barcodes too. You can see our video on this feature " rel="noopener noreferrer" target="_blank" title="Data Matrix Support">\n here\n \n .\n \n \n \n \n Linear Barcode Decoding\n \n \n The OpenMV Cam M7 can also decode 1D linear bar codes. In particular, it can decode EAN2, EAN5, EAN8, UPCE, ISBN10, UPCA, EAN13, ISBN13, I25, DATABAR, DARABAR_EXP, CODABAR, CODE39, CODE93, and CODE128 barcodes. You can see our video on this feature\n " rel="noopener noreferrer" target="_blank" title="Bar Code Support"> here . AprilTag Tracking Even better than QR Codes above, the OpenMV Cam M7 can also track AprilTags at 160x120 at up to about 12 FPS. AprilTags are rotation, scale, shear, and lighting invariant state-of-the-art fidicual markers. We have a video on this feature " rel="noopener noreferrer" target="_blank" title="April Tags">\n here\n \n .\n \n \n \n \n Line Detection\n \n \n Infinite line detection can be done speedily on your OpenMV Cam at near max FPS. And, you can also find non-infinite length line segments too. You can see our video of this feature\n \n here\n \n .\n \n \n \n \n Template Matching\n \n \n You can use template matching with your OpenMV Cam to detect when a translated pre-saved image is in view. For example, template matching can be used to find fiducials on a PCB or read known digits on a display.\n \n \n \n \n Image Capture\n \n \n You can use the OpenMV Cam to capture up to 320x240 RGB565 (or 640x480 Grayscale) BMP/JPG/PPM/PGM images. You directly control how images are captured in your Python script. Best of all, you can preform machine vision functions and/or draw on frames before saving them.\n \n \n \n \n Video Recording\n \n \n You can use the OpenMV Cam to record up to 320x240 RGB565 (or 640x480 Grayscale) MJPEG video or GIF images. You directly control how each frame of video is recorded in your Python script and have total control on how video recording starts and finishes. And, like capturing images, you can preform machine vision functions and/or draw on video frames before saving them.\n \n \n \n\n\n Finally, all the above features can be mixed and matched in your own custom application along with I/O pin control to talk to the real world.\n\n\n \n \n \n \n \n \n\n\n Specifications\n\n\n \n \n \n \n Processor\n \n \n \n ARM® 32-bit Cortex®-M7 CPU\n \n w/ Double Precision FPU\n \n 216 MHz (462 DMIPS)\n \n Core Mark Score: 1082\n \n (compare w/ Raspberry Pi Zero: 2060)\n \n \n \n \n \n RAM Layout\n \n \n \n 128KB .DATA/.BSS/Heap/Stack\n \n 384KB Frame Buffer/Stack\n \n (512KB Total)\n \n \n \n \n \n Flash Layout\n \n \n \n 32KB Bootloader\n \n 96KB Embedded Flash Drive\n \n 1920KB Firmware\n \n (2MB Total)\n \n \n \n \n \n Supported Image Formats\n \n \n \n Grayscale\n \n RGB565\n \n JPEG (and BAYER)\n \n \n \n \n \n Maximum Supported Resolutions\n \n \n \n Grayscale: 640x480 and under\n \n RGB565: 320x240 and under\n \n Grayscale JPEG: 640x480 and under\n \n RGB565 JPEG: 640x480 and under\n \n \n \n \n \n Lens Info\n \n \n \n Focal Length: 2.8mm\n \n Aperture: F2.0\n \n Format: 1/3" HFOV = 70.8°, VFOV = 55.6° Mount: M12*0.5 IR Cut Filter: 650nm (removable) Electrical Info All pins are 5V tolerant with 3.3V output. All pins can sink or source up to 25mA. P6 is not 5V tolerant in ADC or DAC mode. Up to 120mA may be sinked or sourced in total between all pins. VIN may be between 3.6V and 5V. Do not draw more than 250mA from your OpenMV Cam's 3.3V rail. Weight 16g Length 45mm Width 36mm Height 30mm Power Consumption Idle - No μSD Card 110mA @ 3.3V Idle - μSD Card 110mA @ 3.3V Active - No μSD Card 190mA @ 3.3V Active - μSD Card 200mA @ 3.3V Temperature Range Storage -40°C to 125°C Operating -20°C to 70°C Show more