Release MSRP will be $299, and $50 off for pre-orders. Shipping is estimated for September 2026. I also reserved the right to delay the shipping due to any unforeseen circumstances. But you can cancel the pre-order any time before shipping. NullPerator runs a heavily modified version of PicoTracker firmware, but the project file should be cross-compatible with pT (non ADV) version. Development SDK, hardware schematic, CAD design, and documentation will be released around the release date. Full Spec (Not app capabilities are utilized in current firmware, but they will be in the SDK) ESP32-S3 High-performance SOC 16MB of Flash 8MB of PSRAM 1.54 inch 240x240 IPS display Bluetooth & WiFi wireless capabilities Stereo Hi-Fi quality audio codec Stereo Audio Input (Alternative mode for the audio jack) TRS MIDI in & out (Type A for output, Type A & B auto detect for input) Onboard speaker Onboard microphone Headphone Mic support 6-axis gyro & accelerometer High-speed micro SD card support 720mAh battery (estimated ~4+ hr of usage) 6 GPIO, UART, I2C exported via 20P FPC for development purposes 4P JST-SH I2C expansion port 8GB SD Card included with factory content Note: The project is under development, so anything might change, but it will be clearly communicated. Although some hardware specs are listed, they might not be utilized in the factory firmware. But SDK & documentation will be provided. We will host a community app page for people to share their own software. Return & Warranty: NullPeartor isn't really designed to be practical & durable in mind. It's still really well built, but please take extra care using it & storing it. We won't have a return period for it, but we will be able to accept warranty & repair requests for 1 year.
