Category PREFAB Page P17 Description: Orbitš¢s patent pending Power Pedestal are NEMA 3R Listed raceways for switches and devices that serve power to nearly 99% of all common rooftop equipment. PP Series is a stand-alone support that requires just one roof penetration, without the need for extra bracing. Available in 30š½ and 60š½ heights, PP Seriesš¢ two-piece design reduces the amount of labor and material required to šœstick-buildš½ similar solutions in the field. Steel Stand protects conductors and devices from impact far better than tubular raceway. Grounding provisions are included, and model no. PP-60-S features Terminal Lugs that allow for easy bonding of safety switches per NEC.Power Pedestal allow conduit to be routed below the roof-line, which further reduces the number of roof penetrations needed. Minimal penetrations help to maintain rooftop integrity, and improve the overall roof aesthetic. This solution frees installers from moving heavy loads of material to the roof. Power Pedestal can be installed discretely while other trades are working in the same area. Since most raceway is out of the sunlight, de-rating of conductors per NEC 310.15 is greatly reduced. Features: - NEMA 3R Listed raceway designed to mount devices that serve power to rooftop equipment- UL Listed for Wet locations- Stand-alone unit requires only one roof penetration and no additional bracing- Route conduit paths below the roof line- Base and Stand sold separately- Ideal for off-site prefabrication- Extension Coupling (PPEC-12) adds 12š½ of height to Stands (sold separately)- Patent Pending General Specifications: Stand Material 13 GA Steel Base Material 3 GA Steel Coating Zinc Plating + Powder Coated Color Grey Mfg. Process Welded PP-30-S Specifications: - Two (2) 1-gang device openings with gasketed Blank Covers (1-BC)- Includes 10-32 Ground Screw with 10" Solid Cu. #12AWG Pigtail (top opening) PP-60-S Specifications: - Three (3) 1-gang device openings with gasketed Blank Covers (1-BC)- Two (2) #1/0-14AWG Double Terminal Lugs (center opening) with four (4) available terminals Base Specifications: - PP-30-B opening 3/4š½- PP-60-B opening 1-1/2š½- Includes Installation Instructions and four (4) 1/4"-20 Bolts for assembling the Stand- Features four (4) hole provisions for 3/8š½ anchor bolts or stud anchors (not included, by other) Applications: - New construction or retrofit- Designed for every type of non-slanted commercial rooftop (membrane, metal, built-up, etc.)- 60š½ Post is ideal for fused and non-fused safety switches that serve rooftop equipment (HVAC units, air handlers, VFDs, etc.)- 30š½ Post is ideal for toggle switches, or providing service outlets within 25-ft of equipment per NEC 210.63- Serving indoor industrial equipment (conveyor belts, machinery, motors, etc.)- Outlet posts for outdoor planters, gardens, and atriums- Access keypad stands for automatic entry gates Certifications: UL File Number: E515242 Literature Seismic Calculation CatalogNumber UPC Description Trade Size Dimensions(W x D) Std.Pkg. Weight/Std.Pkg. PP-30-B 8-35243-02899-9 Power Pedestal 30š½ Base 3/4" 10" x 10" 4 33 lbs PP-30-S 8-35243-02900-2 Power Pedestal 30š½ Stand - 3" x 3" 4 32 lbs PP-60-B 8-35243-02901-9 Power Pedestal 60š½ Base 1-1/2" 10" x 10" 2 16 lbs PP-60-S 8-35243-02902-6 Power Pedestal 60š½ Stand - 3" x 3" 2 31 lbs PPEC-12 8-35243-02924-8 PP-30 PP-60 EXT. Coupling 12š½ - 12" x 3" x 3" 4 17.6 lbs ROOF SEALANT DISCLAIMER: End users are advised to work with roofing contractor to ensure Power Pedestal installed on rooftops are properly sealed in accordance with all applicable code enforcement agencies; authorities having jurisdiction (AHJ); city, county and state building codes; project specifications, et. al. Download PDF File Specification
Related
Related
Related
Related