Precision Light, No Moving Parts The One Mini Fixed shares its scale and output with the Adjustable version in Orluna's One collection, a 300lm downlight small enough to disappear into almost any ceiling. Formerly known as the Cell, this fixed variant is built for a single job: throwing a precisely set beam straight down, with nothing to move, adjust or come loose over time. Choosing Your Configuration Driver choice covers 0 to 10V dimming, Dali, mains dimming and non dimming, though it is worth knowing that the 0 to 10V driver does not fit through this fitting's cut out, which matters if void space is tight. Colour temperature is available in 2700K or 3000K, with Orluna recommending 3000K as a natural, versatile default. Beam angle runs from an 18° spot up to a 35° flood across six increments, letting you choose a tight accent or a softer wash for the same fixed position. The Origin engine suits general use, while Origin Natural, Orluna's highest quality option, is worth specifying wherever colour accuracy matters most. The fitting comes with a white RAL 9010 bezel and black baffle as standard, and is available in IP54 or IP65 for wetter environments. How It Works Unlike its Adjustable sibling, the Mini Fixed has no tilting mechanism, the LED engine is set in one direction inside the housing and stays there. This simplicity means fewer moving parts over the fitting's life, while the same machined aluminium body manages heat from the LED engine to protect long term colour consistency and output. Where It Works Best With a 51mm bezel and 46mm cut out, identical in scale to the Mini Adjustable, this fixed version is the better choice wherever a consistent, repeatable beam matters more than the ability to re-aim after fitting, for example in a run of downlights along a corridor or hallway where every fitting needs to point exactly the same way. It is also a sensible choice anywhere the Adjustable's tilt mechanism is simply unnecessary. Made By Orluna In 2009, Andrew Kilborn took control of Orluna and steered the business toward the high end architectural lighting market. The Quad 50 downlight that followed became an early success with international lighting designers, paving the way for the compact architectural families, including One, that Orluna produces today. Good To Know 51mm bezel, 46mm cut out 300lm output White bezel, RAL 9010, with black baffle Available in IP54 or IP65 0 to 10V dimming driver does not fit through the cut out Backed by Orluna's 20 year spares, repair and reuse programme Made to order and non-refundable Moonlight Design recommends installation by a registered NICEIC electrician Questions People Ask Why choose Fixed over Adjustable?The Fixed version has no tilt mechanism, so it is well suited to repeat installations where every fitting needs to aim identically, or simply where adjustment is not needed. What colour temperatures are available?2700K or 3000K, with Orluna recommending 3000K as a versatile, natural feeling default. Is this fitting suitable for bathrooms?Yes, when specified in IP65, subject to the correct zone rating for the installation.
