The 350g version of Ortofon’s record stabilizer — more mass, for decks with the bearing to carry it. The Heavy is the same design as Ortofon’s Standard stabilizer with more mass behind it: 350 grams against 240, in the same satin matte anodised finish in silver or black, with the same textured wave-grip around the edge. More mass couples the record to the platter more firmly and damps resonance more aggressively, which is what you want on a heavier deck with a solid platter and a bearing built to take it. Ortofon frames the two-model range as designed to complement a variety of turntables, and names the Standard as the one for entry-level and sub-chassis designs — which leaves the Heavy for everything more substantial. Two honest caveats. Ortofon does not publish a bearing load limit for either model, and not every turntable is designed to carry 350 grams at the spindle; if your deck is suspended or lightly built, the Standard is the safer choice and we are happy to talk it through. And Ortofon confirms the aluminium construction and felt underside only for the Standard, not explicitly for this model, so we have not stated them here as fact. Features 350g record stabilizer — 110g heavier than Ortofon’s Standard version Satin matte anodised finish with Ortofon’s textured wave-grip More mass couples the record more firmly and damps resonance more aggressively Suits heavier turntables with solid platters and substantial bearings Ortofon points entry-level and sub-chassis decks to the Standard version instead Specifications Type: Record stabilizer weight, heavy Weight: 350g Finish: Satin matte anodised, with Ortofon’s textured wave-grip Difference From the Standard: Mass only, on the published data: 350g against 240g, an increase of 110g Suited To: Heavier turntables with solid platters and bearings built to carry additional mass. Ortofon names the Standard version, not this one, as the choice for entry-level and sub-chassis turntables Use: Placed over the spindle onto the record label area before playback Origin: Ortofon A/S, Nakskov, Denmark Not Published: Material — Ortofon confirms aluminium with a felt underside for the Standard version but does not repeat it for the Heavy, so we have not stated it; whether this model has a felt underside; diameter and height; spindle bore diameter; any bearing load guidance Note: Ortofon publishes no bearing load limit. At 350g this is the model where that matters most — if your turntable is suspended, sub-chassis or lightly built, the Standard version is the sensible choice. That is our advice rather than a manufacturer warning
