OS3 HO Lite Controller The HO Lite is an entry-level HO Scale electronic controller, intended for use with All HO cars from Tjets to 6 ohm magnet cars operating up to 24V but is best between 12-20V. Cars in the range of the controller include, 6 ohm Tyco, Tomy, LifeLike, Wizzard, Slottech and Viper cars, all Autoworld and DASH cars, and all vintage Tyco and Aurora cars. It features all of the basics of the Pro Series controllers.Click here to review the Pro Series Basic Features. It has 38" of colour matching 16ga super flexible silicone wire outside the handle connected to colour matching insulators over steel clips. Designed to handle rough use, the fuse and Sensitivity knob are tucked into the handle and are not as susceptible to drops. The color-coded wire makes it easier to ensure the correct wire makes it to the correct post. The absence of a Brake Pot means no brakes to blow when hooked up wrong. These features makes it great as a "Rental" or "House" controller, the controller you lend your guests instead of your ALL Pro. Features: Adjustable Sensitivity Provides a wide range that is set to run all HO cars from Tjets to 6 ohm magnet cars running up to 20V. On/Off Brakes Brakes are available when the RED wire is connected. HO Lite Controls: Sensitivity Knob: Fully CCW is the lowest sensitivity for the slowest starting speed. Fully CW is the highest sensitivity for the highest starting speed. Brakes: Connecting the RED wire provide Full Brakes at 0 ohms. Disconnecting the RED wire provides NO Brakes.
