The easiest application yet! Osmo Polyx-Oil is a general purpose Hardwax-Oil wood finish that is derived from natural vegetable oils and waxes. Resistant to water, dirt, beer, wine, cola and saliva, Osmo Polyx-Oil is microporous and molecularly bonds with the wood, meaning it does not crack, flake, peel or blister. Our new advanced formula of Polyx-Oil has been specially engineered in Germany to be the first Hardwax-Oil available on the North American market that can be easily applied with a brush or roller, with no buffing necessary! Can be spot-repaired and/or restored/renewed with no sanding required, therefore wood never needs complete sanding and refinishing again. Easy to apply – used by both professionals and homeowners Extremely durable and hardwearing Can be spot-repaired and refreshed with no sanding required Microporous finish which does not crack, peel or flake Very water and dirt resistant as well as juice, tea, cola, wine, beer, coffee. Enhances the wood’s natural character Saliva-resistant and sweatproof, suitable for children’s toys Coverage Coverage Approx. Coverage 24m²/L (258 ft2/L) with one coat Approx. Dry Time 8-10 hrs Number of Coats 2 coats Application Instructions BY HAND WITH FLEECE APPLICATOR PADS Apply two thin coats with our fleece applicator pads (best way to ensure you avoid over-application). Stir the Polyx®-Oil well and pour into tray Work the product into the wood thinly and evenly in figure 8 or circular motions using the fleece applicator pad Be sure to thinly and evenly coat the surface and leave on the surface for approx. 5 minutes Allow approx. 8-10 hours drying time. Allow for good ventilation whilst drying Apply second coat following previous steps. BY HAND WITH A CLOTH/RAG Apply three thin coats with a lint-free microfibre cloth. ie. Osmo Easy Pads. Stir the Polyx®-Oil well and prior to use Work product into wood using cloth in a circular or figure 8 pattern Allow roughly 15-minutes for oils to penetrate Working with the grain, remove all excess product from surface Allow 8-10 hours drying time prior to recoating Apply second and third coats following previous steps WARNING: Cloths saturated with product are a spontaneous combustion hazard and should be left out unfolded until dried, prior to disposal or preferably stored in a proper fireproof container BY HAND WITH SCOTCHBRITE PADS Apply two thin coats with non-abrasive white scotchbrite pads Stir the Polyx®-Oil well and pour into tray Work the product into the wood thinly and evenly in figure 8 or circular motions using a white pad Be sure to thinly and evenly coat the surface and leave on the surface for approx. 5 minutes With a clean white pad, polish the surface ensuring no swirl marks, rings, or wipe marks Ensure all excess product is removed from surface Allow approx. 8-10 hours drying time. Allow for good ventilation whilst drying Apply second coat following previous steps.
Related
Related
Related
Related