Who are we to stand in the way of progress? Introducing the all new OSR-X With over 1.5" added height compared to the standard OSR we know and love, this opens up several possibilities. Run custom 14" shocks without a body lift Run 10-12" shocks and increase ground clearance over the standard OSR (using OSR spec shocks) Look cool doing it Move the shocks where they should've been in the first place, to the outside of the frame. The FGP "OSR-X" allows for longer shocks, makes shock install/removal a breeze, and greatly improves the efficiency and performance of your shocks. This kit utilizes fishplate gusset frame plates to add load bearing strength at the mounting points, as well as radiused upper mounts to provide more weld surface and strength. Designed to be compatible with 10-14" shocks. Custom specks often required. For 2.0 shocks, a minimum 3.5” wheel backspacing is recommended for tire clearance. Example: if you have 4.5” BS wheels, you will need 1” spacers to bring it down to 3.5”. 2.5in shocks require minimum 3" backspace. Results may vary. DISCLAIMERS: Remote resi shocks will require a 45 to 90 degree fitting to clear shock mount pocket. Custom spec resi hose/fittings recommended. Custom specked "OSR" shocks, same as the standard OSR, will be required to maximize the full benefits of the OSRX (Option A & B) Frame notching will be required for 2.5" shocks. (Option C) Protrusion in wheel well sheet metal near upper mount will need extensive hammering for hoop clearance. Proceed at own risk. (Example shown in last photo) 12 Inch shocks are the safe limitation for stock rear geometry. 14" shocks or longer can only be safely used AFTER you have upgraded your rear geometry (with the FGP 3-Link for example). Upgrading the rear arms does NOT count as upgrading the rear geometry. What's included: Fully assembled/welded OSR Lower shock mount tabs Flanged grade 8 hardware Options: Add reservoir mounts & hardware. Add frame notch plates (for clearing 2.5" diameter shocks) (Not required for Option C) Vehicle Fitment: Option A: 96-02 Toyota 4runner Option B: Includes different lower mounts. 95.5-04 Toyota Tacoma Option C: Protrusion in wheel well near upper mount will need extensive hammering for hoop clearance. Proceed at own risk. 2003-2022 Toyota 4Runner 2007-2014 Toyota FJ Cruiser 2003-2009 Lexus GX470 2010-2022 Lexus GX460 **INSTALL INSTRUCTIONS** Current Estimated Lead Time: 6-10 weeks Lead times are subject to change depending on order volume. We will do our best to estimate and update the site regularly. As this is a "made to order" item, all sales are final.
