OTF-1500X-80-VTQ is a split vertical quenching tube furnace with an 80 mm OD alumina tube, which is designed for quenching samples from high temperatures ( Max. 1500 °C) into an ice water bath or quenching oil to study material phase transitions and microstructures.It is also compatible with air-sensitive samples to heat and quenches in oxygen and the water-free environment with an MTI gas purification and circulation system (as shown in the main image). (Auto electromagnetic sample hanger is added since 07/21/2016) (Manual gate valve was upgraded to an electric one since 6/26/2017 ) SPECIFICATIONS Furnace Structure Dual-layer steel furnace case with air cooling to keep case surface temperature < 65 °C. Vertical and splitable for easy installation of tubes and flanges. Atmosphere-controlled heating treatment with an 80 mm OD alumina tube. Easy quenching control. Simply open the gate valve and let the sample drop directly into the quenching tank by releasing the electromagnetic sample hanger. Power 208-240VAC, Single Phase, 50/60 Hz 6 kW (40A power outlet is required) Heating Temperature 1500 oC < 30 minutes 1400 oC < continuous Max. Heating Rate ≤ 10 oC /min. Heating Element 1500 °C grade SiC---12 pcs. Processing Tube Materials: Alumina tube made in the USA. Size: OD 80 mm x ID 74 mm x Length 1000 mm (included). Heating Zone Heating Zone length: 440 mm Constant Temperature: 150 mm within +/- 1 oC Temperature Controllers 30 programmable segments for precise control of heating rate, cooling rate and dwell time. Built-in PID Auto-Tune function with overheating & broken thermocouple broken protection. Over-temperature protection and alarm allow for operation without attendant. +/- 1 ºC temperature accuracy. One S-type thermocouples. RS-485 Communications Port. PC-controlled software and interface module are optional. (Standard Modbus protocol, written by LabVIEW). MTS02-Y Temperature control software kit (for YD518P series controllers) + 15" laptop package is available at the options bar. Click for detailed information about the MTS02-Y software kit. Eurotherm Temp. controller (optional) Upgrade the temperature controller to the Eurotherm 3000 series Temperature Controller which is fully compatible with LabVIEW. This package includes a Eurotherm 3000 series programmer, a communication cable (RS485 - USB), and a software CD. Water-Cooled Flanges Both top and bottom flanges have water-cooling jacket (See left picture), which cools and preserves the O-ring sealings on the flange during high-temperature operation. Please click the picture below to order a water chiller at an extra cost. Hermetic Quenching Tank (Optional) Hermetic quenching tank is optional for air-sensitive materials, which enables the entire quenching process under atmosphere control. Please contact MTI for further inquiries. Vacuum (Optional) 3 psi) exists within the furnace chamber. The flow rate of working gas should be limited to < 200 SCCM ( or < 200ml/min )
Related
Related
Related
Related