Kenwood Excelon sound for your Harley If you're ready to upgrade the sound on your 2014-up Harley-Davidson®, this Kenwood Excelon set has everything you need. The P-HD4UT speaker and amp package features fairing and rear speakers, plus two compact amplifiers designed as a perfect match for select Harley-Davidson Street Glide® and Road Glide® Ultra® models (Excluding CVO® models) with a rear seat and Tour-Pak. This speaker/amp kit will put more muscle behind your music and there's no flashing required after you install this system. A pair of powerful amps This package includes two 2-channel Kenwood Excelon XM160-2 amplifiers for big-time power. These compact Class D amps are built for life on the road, so you'll enjoy excellent performance no matter where your travels take you. These amps are made to rock hard and run cool, even when tucked into a tight space. Plus, the high-efficiency design won't overload your motorcycle's electrical systems, and they'll work with your factory radio or any aftermarket receiver. You'll install these amps using the included mounting plates and Harley-specific wiring kit — no wire trimming or special modifications required. Two sets of speakers The package includes two sets of Kenwood Excelon XM65F 6-1/2" speakers, tuned and voiced for optimal performance at riding speed. These rugged, weather-resistant coaxial speakers are a great match for the package's amps, so they'll really boost your bike's audio quality. The rugged, road-ready design will stand up to moisture and vibration. Product highlights: system includes two 6-1/2" fairing speakers, two 6-1/2" rear speakers, two 2-channel amps, Road Glide mounting plate, Street Glide mounting plate, Street Glide grilles, and power, speaker, and input wiring designed for select 2014-up Harley-Davidson® Ultra series models with rear seat and Tour Pak no flashing required Kenwood Excelon XM65F 6-1/2" full-range speakers (4) polypropylene woofer cones 1" PEI dome tweeters power handling: 150 watts RMS (300 watts peak) frequency response: 40-25,000 Hz impedance: 2 ohms mounting depth: 2.25" warranty: 2 years Kenwood Excelon XM160-2 motorcycle 2-channel amplifiers (2) high-efficiency design works with Harley-Davidson electrical systems Class D amp technology 80 watts RMS x 2 (2 ohms) includes mounting plates and amplifier wiring kit warranty: 2 years 60-day returns MFR # P-HD4UT Item # 113PHD4UT What's in the box: Kenwood Excelon P-HD4UT owner's manual This Kenwood Harley-Davidson bundle includes 5 individually boxed items: XM160-2 Amplifier (x2): 2-Channel amplifier with attached 6" speaker and 8" power/ground harnesses (inline 15A ATO fuse) Street Glide mounting plate (attached to amplifier) Road Glide mounting plate 5' Power & ground harness with inline 15A ATO fuse 17" Input/Bypass harness 21" Front output harness 6" Input Link harness Ten 6" wire ties 4 Star washers Instruction manual XM65F Speakers (x2): Two 6.5" 2-way speakers 2 Gilles Instruction manual CA-HRN14UT Rear Harness: 7.5' T-Harness Instruction manual Product Research FeaturesAmplifiersFront & Rear Speakers Features Compatibility: The Kenwood P-HD4UT Front & Rear Ultra Package is designed specifically for installation in the following Harley-Davidson motorcycles with factory rear seat/tour pak: 2014-up Limited Ultra Classic (FLHTK) 2014-up Ultra Classic (FLHTCU) 2020-up Limited Road Glide Ultra (FLTRK) 2016-up Road Glide Ultra (FLTRU) 2014-up Tri Glide Ultra (FLHTCUG) Amplifiers No Flashing Required: The two included Kenwood XM160-2 amplifiers are tuned for the best performance with a stock Harley-Davidson headunit, letting you install both amps without the need for flashing the factory radio. Power: The Kenwood XM160-2 amplifier can output 80W RMS (2Ω) x 2 channels. Class D Design: The amplifier features a Class D design, which uses digital switching power supplies. The result is a more efficient amplifier, generating less heat than Class AB amps of equal power. The Class D design also allows the amplifier to be built on a small chassis, and installed where space is limited. Signal Sensing: The amplifier has a signal-sensing turn-on circuit on the speaker level input. When a signal is detected on the speaker level inputs, the amplifier will automatically power on. When the signal is no longer detected, the amp will turn off. This allows you to install the amplifier without a remote turn-on lead. Input Sensitivity Control: The XM160-2 features an Input Sensitivity control, letting you dial in the maximum headunit signal while keeping it below the distortion point. Connections: Power & Ground: The amplifier features an attached 8" power & ground input harness consisting of 10-gauge wire terminated in a Molex plug. An additional 5' power & ground harness attaches to this and gets run to the vehicle battery. The amp's 8" power wire includes an inline 15A ATO fuse, and the 5' extension includes an additional inline 15A fuse for protection at the battery. The power and ground wires are terminated in 0.32" ring terminals. Speaker Level Input/Bypass: A 17" 8-pin harness provides the input channels, with connectors that plug directly into the factory radio output wiring. A 4-pin Bypass harness is attached, letting you jumper the input signal back out to additional amplifiers (sold separately) using the provided Input Link harness. Speaker Output: A 21" 4-pin output harness provides the connection to the Harley-Davidson factory front speaker wires. Amplifier Mounting: Two amplifier mounting plates are provided with each amplifier, for Harley-Davidson Road Glide/Road Glide Ultra and Street Glide/Street Glide Ultra. Both brackets include pre-applied hook-and-loop fastener as well as on the amplifier, letting you easily attach/detach the amp to either mounting plate. The mounting plates use factory hardware for mounting. Front & Rear Speakers Speaker Integration: The Kenwood XM65F motorsports 6-1/2" speakers are designed for installation into select 2014-up Harley-Davidson Street Glide/Street Glide Ultra, Road Glide/Road Glide Ultra, and CVO Ultra motorcycles. One pair of XM65F speakers mount into the factory front fairing location using the factory mounting hardware and wiring. A second pair of XM65F speakers is provided for the rear seat location. Replacement speaker grilles are provided. The front speakers connect using the factory speaker wiring, while a 7.5' CA-HRN14UT T-harness is provided for connecting the rear set of speakers. Construction: The XM65F speakers feature a 6-1/2" IMPP (Injection Molded Polypropylene) woofer cone and a coaxially-mounted 1" PEI (Poly-Ether-Imide) dome tweeter.
Related
Related
Related
Related