Painterly Forest Grain Removable Wallpaper Bring the calm rhythm of the woods indoors. Painterly Forest Grain layers hand-drawn grain lines and organic movement to create a modern, nature-inspired backdrop for living rooms, bedrooms, nurseries, and refined rental spaces—without the commitment. Each roll is 24 inches wide and available in heights up to 120 inches, making it easy to cover full walls or craft statement panels with a seamless look. Key Features PVC-free and printed with eco-friendly, water-based inks for a healthier home. Removable design made for damage-conscious spaces when applied to suitable, properly prepared walls. Low-sheen, design-forward finish that minimizes glare and highlights painterly texture. Edges are designed to butt together for a clean seam and cohesive pattern flow. Cut-to-fit: trim easily with a sharp craft knife or scissors. Ideal for feature walls, entryways, home offices, and rental-friendly refreshes. Sizing Tips Measure your wall height and select the roll height closest to (or slightly longer than) that measurement. Allow 2–4 inches extra in height for trimming at the ceiling and baseboard. To estimate quantity: divide your total wall width (in inches) by 24, then round up to the next whole roll. Installation Guidance Best results on smooth, clean, dry, and properly painted walls (cured for at least 30 days). Avoid heavy texture, high humidity areas, and stain-resistant or fresh paints. Always test a sample first. Gather tools: tape measure, level, pencil, smoothing tool, sharp knife or scissors, and a step stool. Clean the wall with mild soap and water; let it dry completely. Mark a plumb line to guide your first roll. Starting at the top, align the first roll to the plumb line. Peel a small section of backing and adhere, smoothing as you go. Continue peeling the backing in 8–12 inch sections, smoothing from the center outward to remove bubbles. Apply the next roll, carefully butting the edges without overlap to match the pattern. Trim excess at the ceiling, baseboard, and around outlets with a sharp blade. Step back and smooth any remaining bubbles or edges. Replace plates/covers once fully adhered. Care Instructions Wipe gently with a soft, damp cloth. For tougher spots, use mild, non-abrasive soap. Avoid harsh chemicals, bleach, or scouring pads. For removal, slowly peel from a corner at a low angle. If needed, warm the panel slightly with a hair dryer to ease release. Prolonged high humidity may reduce adhesion; ensure proper ventilation. Note: Surface condition and paint type can affect adhesion and removability. Testing a sample is recommended for best results.
