Measure high temperatures with digital accuracy on a modest budget. The DT2-7 digital pyrometer measures kiln temperature for improved firing results. With the DT2-7 you can fire copper enameling, control the cooling rate of difficult glazes, or know when to begin monitoring glass in a switch-operated kiln. Monitor electric pottery firings up to cone 10. The liquid crystal display is easy to read even in bright daylight. This reliable hand-held pyrometer weighs only 5 ounces and measures in degrees F up to 2372F. Replace the Type-K thermocouple in seconds with a simple plug-in connection. The on-off switch saves battery life. The plastic display case is rated for a room temperature of 32 – 122 degrees F. The DT2-7 comes with a thermocouple, thermocouple wire, 9 volt battery, carrying case, wall mount screws, stand, and printed instructions. Prop the meter on the metal stand for easy viewing. The DT2-7 is easy to use. Turn on the switch and insert the thermocouple into the kiln. The DT2-7 is easier to read than analog (needle-indicator) meters. DT2-7 SPECIFICATIONS Dimensions: 2 3/4″ wide x 4 1/4″ high x 1″ thick 1/2″ liquid crystal display digits Low power consumption Measurement range: -50F – 2372F Environmental operating temperature: 32F – 122F Degrees F display Type-K thermocouple with 5’ of wire Requires 9 volt DC battery Battery life: 150 – 200 hours of continuous use Low battery indicator message Weight: 5 oz. Warranty: 90 days Replacement thermocouple: PY-71
