Parting wax is a non-silicone green wax specially formulated to produce a tough, durable, high-gloss surface. When used with #13 PVA, Partall® parting wax delivers excellent release characteristics. Special preparation is required when using on a new mold: Use a clean dry cloth or applicator pad to apply a thin even coat of Parting Wax to mold surface. If buffing by hand, apply to small section and begin buffing within one minute of application. A power buffer equipped with a terry cloth or lamb's wool pad will reduce labor time on larger surfaces. Keep power buffer moving constantly so as not to allow build-up of friction that could burn through the wax coating. Surface should be buffed to a glossy finish. In order to insure complete coverage, repeat application and polishing process at least three times when initializing new or reconditioned plugs. Allow one hour for solvents to evaporate, producing a tougher wax barrier.
