Pavex WBA is a high solids water-borne, non-yellowing, cross-linking acrylic sealer that is stable and will not suffer embrittlement, flaking or discolouration due to the harsh Australian conditions and elements. Pavex WBA is suitable for all types of masonry surfaces. Pavex WBA is the most efficient and durable gloss water based surface sealer available for the protection and preservation of masonry substrates. It will inhibit stain causing moss and fungal growth because it contains a very powerfull biocide. Because Pavex WBA is a non-toxic product, it is ideal for internal use as there is almost no odour. Pavex WBA is suitable for: All surfaces that the Pavex SBA is applied to All Clay Bricks & Pavers Midland Clay Bricks & Pavers Terracotta Stone APPLICATION Pavex WBA can be easily applied by the home handy-person, or by one of our approved applicators. The surface should be high pressure cleaned and scrubbed with detergent for the removal of all dirt and stains, even if the pavers are new. This will also remove the oily release agent used in the moulds during manufacture. Allow to dry for at least 3 days before applying sealer. Ensure no rain is forecast for 24hrs after application. The product can be applied by brush, roller or airless spray only. (Roller is preferred). A brand new high quality 25mm NAP roller is recommended. COVERAGE Pavex WBA applied to porous paving will on average cover 2.5m2 per litre, which is inclusive of 2 coats. CLEANING Brushes and rollers will wash up in water.
