BRAND NEW GM IGNITION KIT WITH SPARK PLUG WIRES THAT RUN UNDER THE EXHAUST THIS KIT IS SUPPLIED WITH A READY-TO-RUN DISTRIBUTOR, MSD BLASTER SS COIL, DISTRIBUTOR CLAMP, AND SPARK PLUG WIRES INCLUDES: PROCOMP READY-TO-RUN CHEVY DISTRIBUTOR (#7001): READY-TO-RUN DISTRIBUTORS INCLUDE A BUILT-IN IGNITION MODULE THE READY-TO-RUN DISTRIBUTOR IS THE PERFECT UPGRADE FOR OUTDATED POINTS DISTRIBUTORS A MAINTENANCE-FREE MAGNETIC PICK-UP ACCURATELY TRIGGERS THE MODULE THE INCREASED OUTPUT OF THE AMPLIFIER EASILY OUTPERFORMS STOCK IGNITIONS AND WILL SMOOTH OUT ENGINE IDLE, IMPROVE STARTING AND PROVIDE A MUCH HIGHER RPM RANGE. THERE IS ALSO A VACUUM ADVANCE CANISTER TO HELP IMPROVE ECONOMY FOR STABILITY AND ENDURANCE, AN OVERSIZED STEEL SHAFT SPINS IN A TOP-MOUNTED SEALED BALL BEARING, WHILE AN EXTRA LONG SINTERED BUSHING GUIDES THE SHAFT AT THE BASE OF THE HOUSING FOR POSITIVE STREET PERFORMANCE, THE READY-TO-RUN IS THE BEST CHOICE MSD BLASTER SS COIL (#8207): COMPACT AND POWERFUL, THE ADVANCED DESIGN OF THE BLASTER SS COIL DO NOT LET THE COMPACT SIZE OF THE BLASTER SS COIL FOOL YOU, BECAUSE IT IS PACKED WITH PERFORMANCE! THE EFFICIENT E-CORE WINDINGS ARE DESIGNED TO PRODUCE HIGH AMOUNTS OF CURRENT WITHOUT SACRIFICING THE VOLTAGE OUTPUT. THE SECONDARY WINDINGS ARE WOUND ON A SEGMENTED BOBBIN WHICH REDUCES THE CHANCE OF VOLTAGE BREAKDOWN BETWEEN THE PRIMARY AND SECONDARY WINDINGS. FOR MORE PROTECTION, THESE WINDINGS ARE ENCASED IN A POLYURETHANE COMPOUND FOR COMPLETE PROTECTION AGAINST VIBRATION. THE BLASTER SS FEATURES BRASS TERMINALS AND A STURDY HOUSING. IT IS SUPPLIED WITH A 90 DEGREE BOOT, TERMINAL AND VIBRATION MOUNTS. IMPROVED OUTPUT COIL FOR ELECTRONIC IGNITIONS, AND MSD IGNITIONS EFFICIENT WINDING DESIGN AND ASSEMBLY CREATES A COMPACT HOUSING PRIMARY AND SECONDARY WINDINGS ARE ENCASED IN CIBA POLYURETHANE 70:1 TURNS RATIO AND LOWER PRIMARY RESISTANCE PRODUCE HIGH VOLTAGE OUTPUT TOUGH, RIGID HOUSING WITH A TALL TOWER AND BRASS PRIMARY TERMINALS PROCOMP BILLET DISTRIBUTOR HOLD DOWN CLAMP (#1091D): THIS CLAMP IS STRONG ENOUGH TO KEEP THE TIMING LOCKED IN PLACE IN EVEN THE TOUGHEST ROAD CONDITIONS INCLUDES THE MOUNTING STUD, LOCK WASHER AND NUT PROCOMP 10.5MM HIGH PERFORMANCE UNDER THE EXHAUST SPARK PLUG WIRE SET (#327-U-F-D): 90 DEGREE SPARK PLUG BOOTS INSTALLED WITH 90 DEGREE DISTRIBUTOR BOOTS AND TERMINALS INCLUDED. ROUTING SPARK PLUG WIRES IS AN ART FORM. IT TAKES PATIENCE AND TIME TO ROUTE YOUR WIRES AWAY FROM THE HEADERS, THROUGH SEPARATORS AND TO THE DISTRIBUTOR CAP. SOME WIRE SETS FIT PERFECT, BUT A LOT OF PEOPLE WANT TO BUILD THEIR OWN SO THEY CAN ROUTE THEM EXACTLY HOW THEY SEE FIT FEATURES TRIPLE LAYER, SILICONE CONSTRUCTION AND EXTRA INSULATION DESIGNED TO WITHSTAND EXTRA AMOUNTS OF HEAT TO EXTEND THE LIFE OF THE WIRES
