PE100 protects plastic, keeps rubber supple and protects against penetrating moisture if applied to electronics (modules and plugs). These days, vehicles use a lot of plastic. Due to weathering, by UV light and the effects of salt, for example, this plastic can slowly become brittle and take on a weathered appearance. This process takes place very quickly in the case of unlacquered plastic. Due to the intensive protection of PE100 it can be slowed appreciably, thereby extending the life of the plastic. In other words: the probability that bumper parts, mudguards, sun visors, door rubbers, etc. will break or crack is considerably reduced.In addition to this protection, treatment with PE100 also gives these parts a much fresher look. PE100 is also extremely well suited to protecting electronic systems against humidity. The product forms a water-repellent layer and in this way helps protect against corrosion. Due to its excellent lubricating properties PE100 is a perfect product for removing squeaks and creaks in the interior and dashboard. Thanks to its aerosol packaging PE100 is extremely user-friendly and easy to apply. The extra nozzle and tube supplied with the product make it very easy to apply in places which are difficult to access. Base: Silicone oils, mineral oils and additivesDensity: 710 kg/m³Consistency: Liquid (ready-to-use in aerosol)Viscosity: ± 15 mPa.sFlash point: < 0°CPressure resistance: MinimumTemperature resistance: -20°C to >150°CWater resistance: GoodAcid resistance: Resistant to weak acidsCorrosion resistance: Good. The product forms a water repellant layer and therefore contributes to corrosion protection.Penetration ability: GoodPercentage of greasing agent: 17%Application conditions: +5°C to +40°CType of surface: Most plastics, rubber and metalSurface preparation: The surface must be clean, dry, free of grease and non-corroded.Application method: Shake can well before use. If using as a lubricant, spray PE100 directly onto the part for lubrication. If using as a plastic and rubber protector, spray PE100 directly on the surface (distance 15-20 cm) or apply with a cloth or sponge. For a shiny result, polish the plastic with a clean, dry Multi Wipe.Cleaning of materials used: With Innotec Multisol or Innotec Power CleanCleaning of hands: With Innotec Power Scrubs or with Innotec Safe Hand Clean Plus and waterShelf life: 2 years in original, unopened packagingStorage conditions: Store cool and dryType of batchcode: FOther details: Avoid spraying on brake discs, steering wheels, foot pedals and surfaces to be painted.EAN Code: 5400563016626
