PLS Pearl Leveling System 3/16" Clips PLS Pearl Leveling System is an all-in-one lippage control plus spacer system. It makes setting tiles easy and profitable. Features Available in 250, 500, and 2000 quantities For use when installing wall and floor tiles For use on porcelain, ceramic, and natural stone tiles It is especially recommended to improve finishes when working with large-format tiles A system of interlocking re-usable re-usable wedges ensures your floor will be perfectly level from one tile to the next Creates a grout joint size of 3/16" It requires minimal effort to install and remove, plus it speeds up installation time It can be installed by hand or with an optional install tool Prevents the tile from moving during the installation and curing process Multi-polymer plastic provides greater tensile strength while remaining flexible to avoid breakage failures while tightening Each clip thickness is easily identified thanks to the range of different colors available (3/16" is a blue clip) Breaks evenly and clean at the base every time Simple impact removal system (by kicking or mallet) - Always in the direction of the grout joint Use on 1/8" to 1/2" thick tile Wedges sold separately Technical Data Use on 1/8" to 1/2" thick tile Minimum joint size: 3/16" (4,76mm) 250, 500, or 2000 bases per bag How to use STEP 1: Insert the clip under the first installed tile to achieve consistent grout joint spacing STEP 2: Place the next tile on top of and against the clips of the previously installed tile STEP 3: Insert the wedge into the clip to secure, align, and flatten the adjoining tile (your hand or the installation tool can be used to tighten the wedge into the clip) STEP 4: After the thin set has cured, hit the clips (with or without a wedge) with a rubber mallet in the direction of the grout joint STEP 5: Separate the broken clips from the wedges (wedges are reusable and will last multiple jobs with proper installation and removal)
