PEI Ultem 1010 (Polyether Imide) Filament The 3D4MAKERS PEI Filament will be delivered in a vacuum packaging in our recyclable box. Technical information: Polyether Imide (PEI) Ultem 1010 is an amorphous, amber to transparent thermoplastics with a glass transition temperature (Tg) of 217 °C and performs in continuous use up to 170 °C. This inherently flame retardant plastic has UL94 V0 and 5VA ratings. 3D4MAKERS has selected Ultem 1010 for their filament. The 3D4MAKERS PEI Filament has unique properties because it does not come into contact with water during the production process and is directly packaged in a vacuum packaging. These properties make the 3D4MAKERS PEI Filament particularly suitable for usage in FDM and FFF 3D printers. The material has an excellent adhesion between layers which results in great improvement of the impact resistance, strength, durability and the printing process. Measurements & Tolerance Size Diameter tolerance roundness 1,75 mm Filament +/- 0,05mm 95% 2,85 mm Filament +/- 0,10mm 95% Physical properties Description Value Test method Density 1,27 g/cm3 ISO 1183 Tensile Modulus 3200 Mpa ISO 527 Tensile Stress 105 MPa ISO 527 Impact strength Notched Izod 5.0 Kj/m² ISO 180 Printer settings Description Value Printer nozzle temperature 360 - 400°C Heated bed temperature 120 - 160°C Adhesion Magigoo HT on glass or a PEI sheet Drying recommendations 120°C, minimal 4 hours To get the best results while printing we advise you to keep the 3D printer in a room where there is hardly any draft and/or temperature fluctuations. Keep the 3D printer out of the sun. This cannot be a room where people sleep. When the 3D printer is not being used it is important to keep the 3D4MAKERS PEI Filament in a bag and stored in a cool, dry and dark place until it is used again. Safety information REGULATION (EC) No. 1272/2008. According to EC regulations this product is not classified as dangerous for supply/use. Classification according to EU-directive 67/548/EEC or 1999/45/EC. According to EC criteria this product is not classified as dangerous for supply/use. COMPOSITION AND INFORMATION ON THE COMPONENTS CAS-Nr./EG-Nr./Index REACH Nummer Bestanddeel Classificatie Verordening (EG) Nr. 1272/2008 (EG) Nr. 67/548/EEC CAS-Nr. 61128-46-9 EG-Nr. Polymeer ---------- Polyetherimide Not classified Exposure controls / Personal protection Local Exhaust Ventilation at the workplace or on the 3D printer is required. Legally Obliged Information 1 Specific safety, health and environmental regulations and legislation for the substance or mixture. Classification of the substance or mixture The substance is not classified as dangerous according to Regulation (EC) no 1272/2008 (CLP/GHS) and Directive 67/548/EEC. 2 Chemical safety assessment: Does not apply RoHS (Restriction of Hazardous Substances) and REACH (Registration, Evaluation, Authorization and Restriction of Chemicals). Recommended restrictions Do not use in medical applications involving permanent implantation in the human body. The PEI Filament produced by 3D4MAKERS meets the European RoHS and REACH guidelines.
