ENVIRO+ C5 is a premium full synthetic, SAE 0W-20 API Licensed low viscosity engine oil for modern fuel efficient low emission vehicles. It is manufactured using advanced mid SAPS (Sulphated Ash, Phosphorus and Sulphur)* additive technology.ENVIRO+ C5 is licensed by the API (American Petroleum Institute) to meet SP Resource Conserving, SN Plus and ILSAC GF-6A specifications ensuring quality and satisfaction. It also meets ACEA C5 and ACEA C6 as well as many other manufacturer specifications.APPLICATIONENVIRO+ C5 is suitable for use in passenger cars, 4WD’s & light commercial vehicles and is compatible with Petrol, LPG, E10, E85, diesel, including those fitted with emission treatment devices such as Diesel Particulate Filters (DPFs), biodiesel and most other conventional fuels.ENVIRO+ C5 may be used where an SAE 0W-20 or 5W-20 low viscosity, fuel efficient engine oil is specified by the manufacturer. It can be used where ACEA A1/B1 (obsolete), ACEA A5/B5, BMW Longlife-14 FE+, Chrysler MS-12145, Fiat 9.55535-GSX, GMW 18006, ILSAC GF-5, Renault RN17FE, JLR STJLR.51.5122 and Volvo VCC RBS0-2AE low viscosity engine oils are required. It provides improved turbocharger deposit control, oxidation, aeration, fuel economy, fuel economy retention, timing chain and idle stop wear protection and enhanced low speed pre-ignition (LSPI) protection. It is suitable for selected Toyota, Mazda, Honda, Nissan, Subaru and many other makes and models.ENVIRO+ C5 is suitable for use in passenger cars, 4WD’s & light commercial vehicles and is compatible with Petrol, LPG, E10, E85, diesel, including those fitted with emission treatment devices such as Diesel Particulate Filters (DPFs), biodiesel and most other conventional fuels.ENVIRO+ C5 may be used where an SAE 0W-20 or 5W-20 low viscosity, fuel efficient engine oil is specified by the manufacturer. It can be used where ACEA A1/B1 (obsolete), ACEA A5/B5, BMW Longlife-14 FE+, Chrysler MS-12145, Fiat 9.55535-GSX, GMW 18006, ILSAC GF-5, Renault RN17FE, JLR STJLR.51.5122 and Volvo VCC RBS0-2AE low viscosity engine oils are required. It provides improved turbocharger deposit control, oxidation, aeration, fuel economy, fuel economy retention, timing chain and idle stop wear protection and enhanced low speed pre-ignition (LSPI) protection. It is suitable for selected Toyota, Mazda, Honda, Nissan, Subaru and many other makes and models.Note: It is not recommended for use in motorcycles.IMPORTANT MAINTENANCE INFORMATIONFor vehicles fitted with a Diesel Particulate filter we recommend the use of Penrite ENVIRO+DPF CLEANER to clean & prevent DPF blockages, maximise catalyst life and improve engine efficiency, power & fuel economy.NOTE: when changing oil, Penrite recommend using Penrite Engine Flush, a fast acting, solvent free, engine cleaning formulation that removes engine deposits, sludge and contaminants with the oil service drain. It contains added zinc for engine wear protection and its fast acting formulation works in 10 minutes.*Mid SAPS oils may sometimes be referred to as Low Ash oils
