Penta 30″ Square Hot Surface Electronic Ignition System - 30FSSEI-SQ-120VAC Enhance your fire pit experience with our Penta 30″ Square Hot Surface Electronic Ignition System. Start Up: This is done by use of a wall switch or remote control. When the ON command is received, the system completes initial safety checks then starts flow of pilot gas. After 5 seconds the hot surface igniter glows igniting pilot flame. When the system confirms pilot flame present, the main burner gas will flow ignited by the pilot flame. Operation: While enjoying the ambiance of your fire pit, the system is at work monitoring flame status, internal temperatures / voltages and other safety parameters. If flame loss does occur, the system will turn off all gas flow, and then restart by automatically commencing Start sequence. Shut Down: To turn OFF the fire pit simply use wall switch, remote control or whole house system. Features: Fully Assembled- ready to install. Control components are protected within valve box. Start via wall switch, remote or whole house system; auto re-light if flame is lost. Ignition is complete using a robust and reliable Hot Surface igniter. On/Off models: Use with optional wall switch or Remote Control available. High/Low Flame Control Models: Adjust high setting to low setting- ~45% turn down (Remote Control included). 120vac: Standard outdoor grounded power cord- simply plug into GFCI outlet. 24vac Option: Typically used pool side or with other lower voltage requirements. Natural Gas or Liquid Propane: Factory built & tested for either fuel. Internal temperature monitoring with overheat auto shutoff. CSA Certified in US & Canada to ANSI Z21.97-2014 / CSA 2.41-2014 requirements. Optional Controls: On/Off Remote, Timers, Power Supplies and an Emergency Shutoff. What Our Experts Think 30″ square Penta burner with hot surface electronic ignition for dependable, consistent flame start‑up. Durable, professional‑grade construction for residential and commercial fire pits. Even flame distribution enhances warmth and ambiance. Designed for safety, efficiency, and long‑lasting outdoor performance. Ideal for custom square fire pit installations. Q&A Q: What fuel does it use?A: Natural gas (NG) or propane (LP) version available; confirm before ordering. Q: Is it compatible with square fire pits?A: Yes, engineered for 30″ square Penta setups; verify dimensions before installation. Q: Is professional installation recommended?A: Yes, for safe gas connection and optimal ignition performance. Maintenance Tips Inspect burner ports and gas connections regularly for leaks. Clean burner surface and pan with mild soap and water; avoid harsh chemicals. Keep the area surrounding the burner free of debris. Protect from harsh weather when not in use. Follow manufacturer guidelines for hot surface ignition system care.
Related
Related
Related
Related