Permatex Medium Strength Threadlocker Blue is a gel formula that provides “liquid-reliability” without drips, globs, mess or waste. Available in three convenient sizes, the GEL TWIST™ pin-point applicator, the GEL SQUEEZE™ applicator, or the single-use pouch puts the Threadlocker right where you want it…on the part! Ideal for all nut and bolt applications 1/4″ to 3/4″ (6mm to 20mm). It eliminates the need for stocking expensive lock nuts and lock washers. Locks and seals while preventing parts loosening due to vibration. Protects threads from corrosion. Removable with hand tools for easy disassembly. All-purpose, medium strength Thread Locker Blue Gel Medium Strength OEM specified Conforms to ASTM D 5363 AN0321 (Mil-S-46163A, Type II, Grade N) 10 gram Tube MPN: 24010 Application AutomobileSuggested Applications: Valve cover bolts, water pump bolts, oil pan bolts, drive shaft bolts, rocker arm adjustment nuts, carburetor studs; also ideal for vertical applications.MotorcycleSuggested Applications: All frame mounting boltsHeavy DutySuggested Applications: Starter mounts, alternator mounts, engine mounting bolts Instructions Parts should be clean and oil free. Remove protective cap. Turn dial to expose 1/8″ to 1/4″ of material beyond tip. Apply threadlocker to leading edge of male fitting, covering 5 to 6 threads. Avoid direct contact of tip to metal surface. Assemble parts and tighten to recommended torque.5. Replace protective cap. If contact occurs, expose 1/16” of material and wipe off with a clean towel. Note: Permatex® Threadlocker Gel should not be used on plastic fittings. Do not use on food contact surfaces. Avoid food contamination during use and storage.
