QIDI PETG-GF QIDI PETG-GF, compounded with 5% short-cut glass fibers, combines the user-friendly properties of standard PETG with the enhanced structural strength and rigidity provided by the glass fibers. This results in improved accuracy and dimensional consistency, along with significantly increased tensile strength and stiffness. Enhanced Mechanical Properties and Chemical Resistance Delivers superior strength, rigidity, and impact resistance compared to standard PETG filaments, ensuring long-lasting durability under mechanical stress. Exhibits strong tolerance to common solvents (e.g., alcohols, soap solutions), making it well-suited for everyday applications and household environments. Textured Matte Finish and Enhanced Dimensional Stability Glass fibers provide a matte finish that hides layer lines and improves stability for large prints. Inherently Non-Conductive Provides electrical insulation, making it an ideal material for electronic components, protective enclosures, and fixtures where electrical safety is critical. Outstanding Low-Temperature Resistance Maintains structural integrity and mechanical performance in cold environments, preventing embrittlement and ensuring dependable operation in outdoor, automotive, or refrigeration applications. Multifunctional application scenarios PETG-GF is suitable for a variety of applications from functional indoor parts and creative prototypes to outdoor models, thanks to its high strength, rigidity, dimensional stability, and weather resistance. Equipped with RFID chip Equipped with RFID chip, parameters are automatically identified, saying goodbye to manual settings. Accessory Compatibility Recommended Not Recommended Multi-color printing system QIDI BOX / Support Filament PLA Basic / Build Plate QIDI PEI Plate, QIDI Smooth Plate, QIDI Cool Plate, HF Plate, PC Plate / Nozzle Hardened Steel Nozzle (0.4 / 0.6mm) Bimetal Nozzle (0.4 / 0.6/0.8mm) Tungsten Carbide Bimetal Nozzle (0.4 / 0.6/0.8mm) Brass/Copper plated Nozzle (0.2/0.4 / 0.6/0.8mm) Any 0.2mm size Nozzle Recommended Printing Settings Drying Settings (Blast Drying Oven) 65 °C，5-8 h Nozzle Temperature 240-270 °C Bed Temperature 70-80 °C Printing Speed 20-120 mm/s Physical Properties Density 1.26 g/cm³ Melt Flow Rate 5~10g/10min Vicat Softening Temperature 85°C Heat Deflection Temperature 76℃ Mechanical Properties Tensile Strength(X-Y) 51 MPa Tensile Modulus (X-Y) 2400 MPa Elongation at Break (X-Y) 8 % Impact Strength (X-Y) 35 KJ/m² Downloads Filament TDS Filament MSDS Printing Tips Pre-printing Drying: PETG-GF is highly hygroscopic.Moist filament may cause stringing and reduced strength during printing.It is recommended to dry at 65°C for 5-8 hours.For extended prints, using a dry box or continuous drying during printing is advised. Nozzle Recommendation: The glass fiber content is highly abrasive and can quickly wear down standard brass nozzles, leading to nozzle enlargement and extrusion inaccuracies.A hardened steel nozzle or harder is recommended. 📚For more details please refer to: Filament Guide on WIKI. Vacuum Aluminum Foil Packaging According to the test, the water vapor transmission rate of ordinary sealed packaging is 4.76%, while the water vapor transmission rate of vacuum aluminum foil packaging we use is only 0.014%. It can be seen that vacuum aluminum foil packaging is more water-resistant. Product Size QIDI TECH PETG-GF Filament 1.75mm Works perfectly with most FDM 3Dprinters on the market.
