Creative bobbin case with gold latch for pfaff machine with 9mm zig/zag Create beautiful bobbin work, also called reverce decorative stitch embroidery with the creative bobbin case. Depending on the type or decorative thread you are using , there are three ways of using it. For heavey threads wind the bobbin with the decorative thread slowly. Place the bobbin in the bobbing case. For less texture, use finer specialty threads and adjust the bobbin tension screw, if needed, so the thread pulls evenly. Putthe bobbin in the creative bobbin case and pull the specialty thread into the bobbin tension.~ For heavier textured threads and yarns you may have to wind bobbin by hand. 1. Thread the top with regular sewing thread 2. Use the recommended size needle for your fabric. 3.Snap on fancy stitch foot 4. Place right side down and tear away stabilser on top. 5. Select stitches where the density is loose. 6. Select slow speed and stitch at a even speed. 7. Increase needle thread tension if needed. Fits Pfaff - 7570, 7550, 7562, 7560, 7530, 7510, 1475, 1473, 1472, 2056, 2134, 2140, 2144, 2170 Create beautiful bobbin work, also called reverse decorative stitch embroidery with the creative Bobbin Case. Depending on the type of decorative thread you are using for your projects, there are different ways of working with the Pfaff creative Bobbin Case.For heavy or speciality threads: Wind the bobbin with the decorative thread slowly. Place the bobbin in the Pfaff creative Bobbin Case. For less texture, use finer speciality threads and adjust the bobbin tension screw, if needed, so the thread pulls evenly and has a slight tension. Put the bobbin in the creative Bobbin Case and pull the speciality thread into the bobbin tension.For heavier yarns and textured speciality threads: Wind the bobbin evenly clockwise by hand. Put the bobbin in the bobbin case. For the most texturedbobbin work, do not pull the heavy thread or yarn into the bobbin tension, but go directly into the bypass slot.To bring up the bobbin thread, hold the needle thread and turn the handwheel towards you.For both techniques: 1. Thread the top with regular sewing thread.2. Use the recommended size needle for your fabric.3. Snap on the presser foot 2/2A or 8.4. Place the right side of the fabric facing down and place Tear Away Stabilizer on top.5. Select stitches where the density is loose. Play around with the straight stitch, zigzag and decorative stitches. Increase the stitch length for best results.6. Select slow speed and stitch at an even speed.7. Increase needle thread tension slightly if needed.Before sewing on your project, practice on a scrap of fabric until your adjustments are set.
