Brand: Hunter Industries SKU: PGV100GS Product Overview The Hunter PGV-100-G-S is a 1-inch screw-top irrigation valve with slip inlet and outlet connections and no flow-control stem. The Big Frog Supply SKU is stored as PGV100GS. It is intended for residential and light-commercial systems using compatible solvent-weld PVC piping where a compact 24 VAC control valve is needed without manual flow adjustment. Hunter rates the 1-inch PGV family for approximately 0.2 to 40 GPM and a recommended pressure range of 20 to 150 PSI. The valve uses a double-beaded diaphragm, reverse-flow solenoid design, internal and external manual bleed, and a standard encapsulated 24 VAC solenoid. Because this configuration does not include flow control, zone balancing or throttling must be addressed elsewhere in the irrigation design. Key Features 1-inch slip inlet and outlet connections No flow control Approximate flow range of 0.2 to 40 GPM Recommended pressure range of 20 to 150 PSI Temperature rating up to 150°F Double-beaded diaphragm Reverse-flow solenoid design External and internal manual bleed Standard encapsulated 24 VAC solenoid Common Uses Residential sprinkler zones Light-commercial irrigation systems Solvent-weld PVC installations Replacing a matching 1-inch slip PGV valve without flow control Compatibility and Installation Notes Confirm the slip sockets match the planned 1-inch PVC piping. Install with the body flow arrow aligned with water movement. Follow the pipe and cement manufacturer’s solvent-weld preparation and cure-time instructions. This model does not include a flow-control stem. Use with a compatible 24 VAC controller unless an approved alternate solenoid is installed. Flush the piping before installation and provide service access in the valve box. Frequently Asked Questions Does PGV100GS include flow control? No. Hunter identifies PGV-100-G-S as the no-flow-control slip configuration. Are these threaded connections? No. Both the inlet and outlet are slip sockets intended for compatible solvent-weld piping. Can it be used with a battery controller? The included solenoid is 24 VAC. Supported battery systems require a compatible Hunter DC-latching solenoid. Why Buy from Big Frog Supply? Big Frog Supply carries Hunter PGV valves, solenoids, diaphragms, pressure regulators, controllers, and irrigation repair components.
Related
Related
Related
Related