Brand: Hunter Industries SKU: PGV-101G-S Product Overview The Hunter PGV-101-G-S is a 1-inch screw-top irrigation valve with slip inlet and outlet connections plus an integrated flow-control stem. The Big Frog Supply SKU is stored as PGV-101G-S. It is designed for residential and light-commercial solvent-weld PVC systems that need a 24 VAC control valve with local flow adjustment. Hunter rates the 1-inch PGV family for approximately 0.2 to 40 GPM and a recommended pressure range of 20 to 150 PSI. The flow-control stem supports zone balancing, reduction of excessive flow, or manual shutoff during service. The valve also uses a double-beaded diaphragm, reverse-flow solenoid design, internal and external manual bleed, and a standard encapsulated 24 VAC solenoid. Key Features 1-inch slip inlet and outlet connections Integrated flow control Approximate flow range of 0.2 to 40 GPM Recommended pressure range of 20 to 150 PSI Temperature rating up to 150°F Double-beaded diaphragm Reverse-flow solenoid design External and internal manual bleed Standard encapsulated 24 VAC solenoid Common Uses Residential sprinkler zones Light-commercial irrigation systems Solvent-weld PVC installations requiring flow adjustment Replacing a matching 1-inch slip PGV valve with flow control Compatibility and Installation Notes Confirm the slip sockets match the planned 1-inch PVC piping. Install with the body flow arrow aligned with water movement. Follow the pipe and cement manufacturer’s solvent-weld preparation and cure-time instructions. Use with a compatible 24 VAC controller unless an approved alternate solenoid is installed. Size the valve according to design flow, pressure loss, available pressure, and downstream demand. Flush the piping before installation and provide service access in the valve box. Frequently Asked Questions Does PGV-101G-S include flow control? Yes. Hunter identifies PGV-101-G-S as the slip-connection model with a flow-control stem. Are these threaded connections? No. Both the inlet and outlet are slip sockets intended for compatible solvent-weld piping. Can the valve be used with a battery controller? The included solenoid is 24 VAC. Supported battery-controller systems require a compatible Hunter DC-latching solenoid. Why Buy from Big Frog Supply? Big Frog Supply carries Hunter PGV valves, solenoids, diaphragms, pressure regulators, controllers, and irrigation repair components.
