Combination of pH Increaser and Test Strips pH Increaser: Use WAVE pH Increaser to raise the pH of the swimming pool and spa water. The pH of the water should be correctly maintained to ensure bather comfort and the protection of the pool or spa and its equipment. Dose Rate 100g of WAVE pH Increaser per 10 cubic metres of water. Application - Ideally, the pH of the water should be maintained at around 7.4. If the pH falls to, or below 7.2, add WAVE PH Increaser into 10 litres of freshwater, using a clean plastic container and mix carefully. Slowly pour the solution into the pool or spa water close to the return inlets and rinse out the container thoroughly. After 24 hours, recheck the pH and repeat the treatment dose as necessary. 3 in 1 Test Strips: Perfect for the residential user, Wave test strips are manufactured in the UK and subject to the same rigorous quality control as other pool testing products. Supplied in pots of 50 tests, the procedure is exactly as expected - dip, shake off the excess and compare to the colour chart printed onto the pot. Test strips available: 3-way test strip providing testing on chlorine, pH, Alkalinity. Perfect for the residential user, Wave test strips are manufactured in the UK and subject to the same rigorous quality control as other pool testing products Supplied in pots of 50 tests, the procedure is exactly as expected - dip, shake off the excess and compare to the colour chart printed onto the pot.
