Milwaukee MW802 PRO 3-in-1 pH, EC, TDS Combo Meter with ATC The Milwaukee 3-in-1 Pro Combo meter easily and accurately measures pH, EC (conductivity) and TDS with a single meter and one single probe. It is ideal for use with Growers, Hydroponics and Aquaponics and provides the ultimate solution for pH and nutrient management. Features: pH, conductivity / nutrient EC, TDS (ppm) with automatic temperature compensation A replaceable, integrated pH, EC, and TDS (ppm) probe with a single 3-foot cable for easy use (SE600 probe included) A fiber junction on the pH sensor to reduce contamination when measuring fertilizer solutions A light weight and portable form factor at just 5.8 ounces with battery and just over 3 inches wide A large, easy to read display Factory calibration with a simple, single point manual calibration for both pH and EC A reputation for a rugged build and long life Specialized design for Hydroponic, Aquaponic, and Greenhouse Growers Specifications: pH Range: 0.00 to 14.00 pH EC Range: 0.00 to 6.00 mS/cm TDS Range: 0 to 4000 ppm pH Resolution: 0.1 pH EC Resolution: 0.01 mS/cm TDS Resolution: 10 ppm pH Accuracy: ±0.2 EC/TDS Accuracy: ±2% Full Scale Calibration Solutions: M10007 (pH 7.01) M10032 (1382 ppm) M10442B 1500 ppm Conversion Factor: 0.5 Calibration: Manual at 1 point Temperature Compensation: Automatic from 0 to 50°C Probe: SE600 combination pH/EC/TDS probe Environment: 0 to 50°C / 32 to 122°F; max RH 95% Battery Type / Battery Life: 1 x 9V alkaline / 150 hours of use Auto-off: After 8 minutes of non-use Dimensions: 7.3 x 3.2 x 1.8 inches Weight: 5.8 ounces (with battery) Milwaukee MW802 Manual CARE AND USE The MW802 PRO Combo Meter includes both a pH and EC sensor in the SE600 integrated probe. Both need maintenance. Properly maintaining your probe will give you fast, accurate results for longer. All pH sensors have a limited life and response time gets longer with age. EC sensors are more robust but can still be affected by residue build up. Here are four tips: 1. Always store with the cap full of buffer or storage solution MA9015, not water. 2. Clean the probe regularly by soaking in cleaning solution MA9016. 3. Calibrate after cleaning and/or storage before testing to adjust for changes in the pH and EC sensor. 4. Gently stir the probe in the sample for a faster result.
Related
Related
Related
Related