Ohaus ST260 2-in-1 Double Salt Bridge Glass Refillable pH Electrode The OHAUS Starter Series of electrodes are designed to produce exact results time and time again. They fit perfectly in the electrode holders on OHAUS bench meters as well as electrode clips on all OHAUS portable meters. This electrode is suitable for samples which may react with Ag ions, such as trisbuffer solution. Specifications: pH Range: 0 to 14 Temperature Range: 0 to 100 ºC Shaft Material: Glass Internal Reference Type: Ag/AgCl Refillable/Non-refillable: Refillable Reference Junction Type: Ceramic pin Refilling Reference Electrolyte: Double salt-bridge 3M KCl(AgCl) Pure KCl solution Dimensions (Shaft): 120 x 12mm Cable Length: 1m Temperature Sensor: No Connector: BNC CARE AND USE This delicate instrument requires proper care and maintenance to produce accurate, reliable results and to ensure a long, usable life. Extend the life of your pH electrode in the following ways: Always keep the electrode moist when not in use by placing it in an electrode storage solution (3M KCl). DO NOT store the electrode in distilled or deionized water, as this will cause ions to leak out of the glass bulb and reference electrolyte. This will produce a slow and sluggish response and can damage the electrode. Remove the electrode gently from the storage bottle and rinse it with distilled water before use. For long-term storage, always keep the electrode in the bottle filled with enough storage solution to cover the bulb. Replenish the bottle as needed. Starter Series Electrodes Data SheetST260 Manual
