Phosphate Remover While phosphates are a primary nutrient source, and are an essential element in a healthy saltwater environment, excess phosphates can have detrimental impacts on the health of your marine life. High phosphate concentrations can lead to aggressive algae blooms in your tank, increased brown tissue growth in your corals (which can mask their natural vivid pigment), and reduced calcium carbonate uptake (which can negatively impact your corals’ skeleton growth). Phosphates exist as ionic and chemically bound by calcium. This causes fluctuations of calcium. In addition, it causes false readings of low phosphate, due to test kits not being able to test for bound phosphate. This is a concern if you are not using a quality phosphate remover, as you cannot rely on your test readings to be accurate. Our Phosphate Remover is designed to eliminate both ionic and chemically bound phosphate in marine and reef aquariums. The media and carbon sources quickly remove the ionic phosphate. Note, however, that it will take longer to remove the bound phosphate, due to its high stability. Our Phosphate Remover will precipitate out both ionic and chemically bound phosphate and place it in existing filter wool/socks. A fine white film building on the glass indicates that you are overdosing. We recommend adjusting your dose and using our White Film Remover Pads to safely clean any buildup from your tank. Contents: – Deionized water – Purified lanthanum Directions: Shaking this product is not required prior to use. You can use the cap as a measuring cup, a full cup is approximately 8ml of solution. Make sure to rinse out the cap after each use. This product must be used in saltwater aquariums with a protein skimmer, and added to a high water flow. Be careful to not overdose; a white film will start to accumulate on the tank glass if you are using too much Phosphate Remover. Dosing: We recommend following the dosing guidelines below when using this product. 0.03 - 0.25 ppm = 0.1 - 1.0 ml per day/100l/26G 0.25 - 1.0 ppm = 0.5 - 2.5 ml per day/100l/26G 1.0 - 5.0 ppm = 1.0 - 5.0 ml per day/100l/26G 5.0 - 10 ppm = 5.0 - 10.0 ml per day/100l/26G 10 ppm = 10.0 ml per day/100l/26G Caution: Keep out of reach of children. May cause skin irritation. In case of contact with eyes, or swallowed seek medical advice immediately
Related
Related
Related
Related