P-Tek is thrilled to announce the launch of the new SQ200W Pro Full-Spectrum LED. Designed specifically for tighter and more compact spaces, the low wattage SQ Pro line will deliver the best light spectra on the market combined with very-high PPFD levels. With a footprint coverage up to 2.6’x2.6’ the high efficiency SQ200W Pro grow light is a perfect solution for home-grow, grow tents, grow rooms and all kinds of indoor cultivations. PHOTONTEK, creating better light for growers. Only the highest-grade materials and components are used in P-TEK’s LED fixtures. Delivering safe, dependable light P-TEK SQ Pro fixtures have industry leading performance. By perfectly balancing a high quality, full spectrum light with highest intensity PPFD delivered through a even square shape bar design. P-TEK Creates the ultimate ceiling of light for the entire plant growth cycle, making these LEDs the smartest option for a higher and faster return on investment. Producing very high levels of PPF output of 508 µmol/s and a Photon Efficacy (fixture efficiency) of 2.5 µmol/J, the SQ200W Pro LED creates a homogeneous light spread at close distance from the crop canopy, resulting in outstanding results when used in 2.6’x2.6’ coverage indoor grow areas. SQ200W Pro LEDStunning featureswith high quality components Producing very high levels of PPF output of 508 µmol/s and a Photon Efficacy (fixture efficiency) of 2.5 µmol/J, the SQ200W Pro LED creates a homogeneous light spread at close distance from the crop canopy, resulting in outstanding results when used in 2.6’x2.6’ coverage indoor grow areas. SQ Pro Line The outstanding performance of the SQ Pro line was achieved through a square shape LED bar design built with latest generation top bin White, Red and Far Red diodes and world class P-Tek controllable drivers. The LED bars are covered with a thin layer of Clear Glue, resulting in higher light transmittance of 99% without light loss, IP65 rating, extended lifetime of diodes and extra corrosion resistance. The SQ200W Pro array creates a uniform spread of light at short distance from the crop ensuring excellent penetration of canopy without hotspots and excessive heat. The advanced heat sink and use of passive natural convection has eliminated the need for a fan, decreasing noise output and significantly improving the life span of the fixture as it has no moving parts. Full-SpectrumThis grow light LED is designed with all grow cycles periods in mind, from propagation, to vegetative and flowering, this fixture may be dimmed, allowing you to adjust PPFD levels produced without losing efficiency. P-Tek SQ Pro LED grow lights use a blend of white, deep red & far red LEDs to produce a highly efficient light source calibrated to provide high intensity, stable and uniform output for optimal light absorption. More ControlIn addition, the SQ200W Pro LED fixture can be externally controlled with a P-TEK Digital Lighting Controller featuring light timing, automated dimming (1% increments), temperature safety control, Sunrise & Sunset Mode for up to 100 fixtures per controller. Universal Control Systems CompatibilityP-Tek Pro LED Fixtures can be fully controlled with either the P-Tek Digital Controller or with any other Control System that utilises 0-10V output signal. Even if your Universal Controller has an RJ port interface, you can still run our LEDs by using a signal converter RJ to 0-10V control adaptor. Product Code: PTEKLED023Efficacy: 2.5 µmol/JPPF: 508 µmol/sInput Voltage: 120-277V, 50-60HzInput Power (100%): 205WInput Current (100%): 1.76A (120V); 0.9A (230V); 0.75A (277V)Footprint: Up to 2.6’x2.6’Waterproof: IP65Lifetime: 60 000 hrsLight Distribution: 120°Light Source: Higher Spec White, Red & Far Red DiodesDimmable: OFF-25%-50%-75%-100% with 0-10V Light Dimmer (Included)External Control: With P-Tek Digital ControllerWeight: 8.82 LbsDimensions: 20.65’’x20.65’’x2.82’’Spectrum: Full SpectrumBTU: 703 BTUs/h
