Phrozen Light Curing Putty Light Curing Putty is a gel-like material that cures rapidly under UV light exposure. Works well for model repairs and modifications, Light Curing Putty is easy to sand and paint on to perfect your models with speed and precision. Light Curing Putty Uses: Restore broken parts to their original shape. Fill gaps and holes in models. Easy to sand and paint on after curing. Applicable on cured resin and plastic. How to use: Clean the surface and remove any dust before applying putty. Use the wooden stick to take out an appropriate amount and apply the putty. Use alcohol to smoothen out the putty and clean the excess. Use Phrozen Cure Beam or other curing lamps with LED wavelengths of 395 nm or above for 15–30 seconds. For maximum result, cure putty at a 1cm distance to ensure that the light can enter through the bottom of the model. Precautions: Avoid direct exposure to sunlight. Please wear gloves when handling the product. For thicknesses between 1 mm–8 mm, cures with UV light for 15 secs–3 mins. Curing time varies depending on the thickness. Avoid direct contact with the skin to prevent allergies. In case of eye contact, rinse thoroughly and seek medical attention immediately. After a long exposure time, the putty may have a higher temperature. Please handle this with caution. Keep away from children. Phrozen Light Curing Putty Specifications Content: Light Curing Putty x1, Wooden Stick x1 Weight: 60g Appearance (Before Curing): Light Yellow Paste Appearance (After Curing): Solid White Tensile Strength: 130-160 kg/cm² Shore D Hardness: 76-80 Solid Density: 1.3-1.4 g/cm³
