Portable Hardness Tester with color screen/Rockwell Hardness Testers Portable/Leeb Portable Hardness Testers Shipped directly from PHASE II+ in NJ, USA Model No. PHT-1900 Also available in the version w/ a Certified Test Block, Model No. PHT-1900C Features State of the art, digital portable hardness tester is designed to test the hardness of large hard metal parts. Clean crisp display shows the incredible functions that can only be found on this new portable hardness tester such as auto-probe detection, auto direction detector, single and multi-point calibration make the new 1900 the most versatile portable hardness tester in the industry. Blazing fast test speeds coupled with memory and output, this unit is a must have for virtually any work shop. The PHT-1900 portable hardness tester can perform tests that easily convert to the most popular hardness scales, including Rockwell, Brinell, Vickers, Shore, etc. Designed to test large hard parts:Example: Tool steel should be close to 1” thick of solid Material Operation: Load the impact body Place the impact body on your test piece Push the button to begin testing and obtain reading Standard Accessories: Base instrument Impact device D Calibrated test block Custom carry case Cleaning brush Operation manual Optional accessories: Impact devices; DC, D+15, DL, G, C Special support rings Functions: Easy to use keypad operation Auto identification of Impact Device Large LCD display with back light USB Ouput Automatic conversions to: Brinell, Rockwell B & C, Vicker and Shore Automatic mean value as well as Min & Max values Battery Indicator Memory capacity (100 groups) Specifications: Accuracy: +/- 0.5% (referred to L=800, Repeatability accuracy: +/- 4L units) L=Leeb Measuring range: 200-960 HL Materials: steel & cast steel, alloy tool steel, stainless steel, grey cast iron, spheroidal iron, cast aluminum, brass, bronze, wrought copper alloy. Battery type: AA alkaline (4) Operating temperature: 5-104 degrees F Dimensions: 150 x 74 x 32mm Weight: 245 grams Special Application Impact Devices Impact Device D Universal standard device: Use for the majority of hardness testing assignments Impact Device DL Needle front section .109” diameter x 1.96” length Measurements in extremely confined spaces Impact Device G Enlarged test tip: For use on solid heavy components such as; rough castings and forgings.Brinell only. Impact Device DC Extremely short impact device Used for very confined spaces such as holes, cylinders, internal measurements Impact Device D+15 Slim front section with coil set back. Hardness measurements in grooves, recessed surface. Impact Device C Reduced impact energy For testing case hardened or thin walled components Specifications: Impact devices D/DC/DL D+15 C G Impact energy 11Nmm 11Nmm 3Nmm 90Nmm Mass of the impact body 5.5gDL: 7.2g 7.8g 3.0g 20g Test tip * Hardness 1600HV 1600HV 1600HV 1600HV * Diameter 3mm 3mm 3mm 5mm * Material Tungsten carbide Tungsten carbide Impact device * Diameter 20mm 20mm 20mm 30mm * Length 147/86mm 162mm 141mm 254mm * Weight 75/50g 80g 75g 250g Max. hardness of sample 940HV 940HV 1000HV 650HB Preparation of surface * Max. roughness depth Rt 10 m m 10 m m 2.5 m m 30 m m * Average roughness Ra 2 µ m 2 µ m 0.4 µ m 6.3 µ m Min. weight of sample * Of compact shape 5kg 5kg 1.5kg 15kg * On solid support 2kg 2kg 0.5kg 5kg * Coupled on plate 0.1kg 0.1kg 0.02kg 0.5kg Indentation of test tipWith 300 HV * Diameter 0.54mm 0.54mm 0.38mm 1.03mm * Depth 24 µ m 24 µ m 12 µ m 53 µ m with 600 HV * Diameter 0.45mm 0.45mm 0.32mm 0.90mm * Depth 17 µ m 17 µ m 8 µ m 41 µ m with 800 HV * Diameter 0.35mm 0.35mm 0.30mm – * Depth 10 µ m 10 µ m 7 µ m – SUPPORT RINGS: We offer a 12pc set of rings for testing concave or convex parts. PHT1500-300
