PicoAAB is the smallest, 3rd generation mosfet with Active Brake. It can work with 14.8V Li-Poly batteries. The system can be installed in every AEG, even the smallest ASG replicas. The installation is very easy and the interference in the replica is limited only to running one or two additional wires from the contacts. It targets the energy from the battery directly to the motor, bypassing the mechanical trigger contacts. As a result, you will gain a higher rate of fire of the rifle and a faster trigger response, and the contacts will be protected against burn out. In SEMI Mode, the brake does not allow for compressing the piston after a shot. The piston stops in front position which eliminates unnecessary stresses, increasing the service life of Gearbox and its parts. It is very important, especially with an AEG power upgrade. After releasing the trigger, the rifle immediately stops shooting. Thus, you gain more realism and, additionally, do not waste your precious ammunition. The Digital Interface (Debouncing) provides full compatibility with the micro-switches. It is fully resistant to contact bounce. You gain a bigger ROF, a faster trigger response and your MOSFET is less prone to heating. Here's a link to its manual which is available in English, Spanish, French, Italian and Polish: https://www.gatee.eu/manuals
![[GATE] PicoAAB MOSFET Set with Active Brake[3rd Generation]](https://cdn.shopify.com/s/files/1/0483/0642/1921/products/GATE_PicoAABMOSFETSetwithActiveBrake_3rdGeneration_1.jpg?v=1616053159&width=480)
