DTF Red Piezo™ Cleaning Solution 8oz (Vacation & Repair) for Epson Printheads - DTF and DTG DTF Red Piezo™ is a professional-grade cleaning and diagnostic solution developed for Epson piezoelectric printheads. It is engineered to flush ink systems, assist in nozzle recovery, diagnose internal printhead issues, and temporarily store (vacation) printheads without drying. This solution includes a red colorizing agent, allowing you to print nozzle checks or test patterns to instantly see whether your printhead is healthy or internally damaged.If the red pattern prints clean and complete, the head is good; if certain channels break or disappear, you have identified the exact location of the internal problem. Red Piezo™ is safe for pigment, dye, DTF, and DTG systems. What Red Piezo™ Can Help With 1. Internal Nozzle & Ink Channel CleaningHelps dissolve dried ink inside the micro-channels of the printhead and improve weak nozzle patterns. 2. Diagnostic Printing (Red Output)When installed in cartridges, the printer will output solid red, which makes it easy to: ● Identify missing channels● Detect internal clogs● Confirm whether a printhead is recoverable or physically damaged This is extremely useful for technicians. 3. Flushing Printheads & Ink LinesRed Piezo™ can be safely used to flush:● Printheads● Dampers/filters● Ink lines● Cartridges 4. 30-Day Storage (Cartridge Printers Only)For printers that use cartridges (NOT DTF printers with white dampers), Red Piezo™ can keep the printhead hydrated for up to 30 days, making it ideal for: ● Vacation● Printer downtime● Long-term safe storage How to Use Flushing / Recovery ● Apply 2–4 ml into the capping area using a syringe● Move the printhead over the solution for a short soak● Run cleaning cycles or manually flush with a syringe and tubing Diagnostic Mode ● Fill refillable cartridges with Red Piezo™● Run a nozzle check or print any design● Evaluate the red pattern to confirm head condition Storage (Cartridge Printers Only) ● Install cleaning cartridges filled with Red Piezo™● Leave installed for up to 30 days● Keeps internal channels hydrated and prevents drying IMPORTANT — Final Step After using Red Piezo™ for flushing, diagnostics, or storage: ✔ Completely flush it out using distilled water or your standard cleaning solution✔ Continue flushing until everything runs clear✘ Do NOT use Red Piezo™ as a permanent ink✘ Do NOT leave it in DTF printers with dampers (risk of cross-contamination)WARNING: Avoid getting any electronics wet. NOTES:● This product is to clean and flush Epson printheads.● Bottle sizes may vary. More Cleaning Products DTF Cleaning Solution (Cleaning & Flush)30-Minute Rescue™ Cleaning Solution (Wet Cap)
