Semi Automatic Belay Devices Innovative and versatile belay device with assisted braking Pinch - a new belaying experience with the PINCH, a new, versatile assisted braking belay device for use in sport climbing, multi-pitch climbing and rope access techniques. The PINCH is the first device on the market that can be attached directly to the central ring of the climbing harness. Thanks to its low, close-to-the-body position, the PINCH does not need to be fixed in place when releasing the rope and the brake rope can always be gripped with all fingers. In addition, the compact belay system provides an increased span, which allows the belayer to pay out 20 - 30 cm more rope at once. The linear rope run through the frontal steel braking grooves reduces rope tangles when lowering and abseiling. In addition to the lowering lever, the speed can be controlled by the pressure of the braking hand, which contributes to increased braking rope control, especially when using thin, soft ropes. The anti-panic function provides added safety not only for beginners. A special feature is the integrated second braking tier, which enables controlled lowering by pulling the lowering lever further when securing particularly light persons or in systems with high rope friction. Users and experienced rope access technicians can permanently deactivate the anti-panic function using a screw supplied. Another plus: When used on multi-pitch lengths, the PINCH is the only device on the market that can be attached to the belay station in four different directions in 90° increments. This means that the lowering lever can always be brought into a position in which it can be operated freely. Features Device can be connected to belay loop using a locking carabiner (not included) or directly to the belay loop itself Direct attachment to the belay loop eliminates the risk of cross loading, as it eliminates the carabiner from the belayer's system It also orients the device closer to the belayer's body and adds significant control to all aspects of belaying Increases the belayer's ability to pay out rope when lead climbing by an estimated 4 to 7 in., while also shortening the distance a lead climber falls by 8 to 14 in. Suitable for dynamic ropes with a diameter of 8.5 to 10.5 mm Suitable for static ropes with a diameter of 10.0 to 10.5 mm (120 kg) Steel at all major wear points, preventing aluminum oxide buildup and increasing longevity Includes Anti-Panic feature, which can be disabled by inserting a small screw, provided in original packaging, in the handle of the device Locking mechanism has additional red line that, if visible, warns the user that the device is not closed properly Vertical and horizontal attachment points offer up to 4 different orientations when top-rope belaying Certifications: UIAA, EN 15151-1, EN 12841-C Technical Specs Best Use Climbing Assisted Braking Yes Suitable for Belaying Yes Suitable for Rappelling Yes Fits Rope Sizes 8.5-10.5 millimeters Weight 235 grams
