Bambu PLA Aero — Lightweight Foaming PLA for RC & Aerodynamic Prints Low Density • Impact Resistant • Matte Finish Overview PLA Aero is a foaming PLA engineered for lightweight, aerodynamic prints like RC planes, wings, gliders, and UAV parts. At higher nozzle temperatures it expands internally, cutting part weight by up to ~50% while retaining toughness and flight-ready durability. Why choose PLA Aero • Ultra-lightweight prints — typically 50–80% the density of standard PLA• Foaming control — tune weight and stiffness via temperature and flow• Impact resistant — tougher than traditional balsa-style or foaming PLAs• Matte, paint-ready finish — sands and finishes easily• AMS & AMS Lite compatible Recommended starting settings • Drying: 55 °C × 8 h (before use)• Nozzle: 220–260 °C (higher temp = more foaming)• Bed: 35–45 °C• Speed: ≤ 180 mm/s• Storage: < 20% RH, sealed with desiccant Material properties (typical) • Filament density: 1.21 g/cm³• Printed density: ~0.55–1.05 g/cm³ (settings dependent)• Tensile strength: 24 ± 2 MPa• Impact strength: 28.8 ± 1.3 kJ/m²• Vicat softening: ~54 °C Notes • Dry thoroughly—moisture reduces foaming consistency• Filament is softer than standard PLA; load/unload gently• 0.4 mm hardened nozzle recommended for stable extrusion What’s in the box • PLA Aero filament spool• Desiccant pack Local advantages (Convoy-Westcan, Winnipeg) • Same-day or next-business-day dispatch when in stock• Free local courier on eligible orders over $50• In-store pickup available
