Burnt Titanium Triple PLA The Eryone Burnt Titanium Triple PLA filament is a material that exhibits captivating colorchanges under different lighting and angles, creating a unique technological atmosphere andproviding an exceptional visual and tactile experience. This material has excellent toughness, producing no bubbles or odors during the printing process, and is resistant to clogging orwarping, ensuring outstanding shaping results and a smoother printing experience. Additionally, its Z-axis tensile strength reaches 34 MPa, with excellent interlayer adhesion. Part I:Suggests Printing Parameters Parameter Set up Nozzle temperature 190-220 ℃ Bed temperature 55-70℃ Bed materia glass, PEI, spring steel plate Bottom printing temperature 190-220 ℃ Sealed printing Supports open printing; better results with enclosure. Printing speed 30-100mm/s Drying conditions 65-75℃, 12h Part II: Physical Properties of Materials Property Testing Method Unit Typical Value Density(g/cm³ at 21.5 ° C） ASTM D792 (ISO 1183, GB/T 1033) g/cm³ 1.23 Vicat Softening Temperature(° C) ASTM D1525 (ISO 306 GB/T 1633) ℃ 54 Heat distortion temperature(° C) ASTM D648 1.8MPa 0.45MPa ℃ 53 Glass transition temperature (° C) DSC, 10 ° C/min ℃ 62 Melt Index(g/10 min) 220 ° C, 10kg 240 ° C, 2.16 kg g/10min 6 Part III: Mechanical Properties of Printed Samples Property Test conditions Test standards unit Typical Value Tensile strength X-Y 50mm/min GB/T 1040.4 MPa 52.2 Elastic modulus X-Y 50mm/min GB/T 1040.1-2006 MPa 1737.5 Elongation at break X-Y 50mm/min GB/T 1040.4 % 2.1 Tensile strength X-Z 50mm/min GB/T 1843 MPa 34.2 Elastic modulus X-Z 50mm/min GB/T 1040.1-2006 MPa 1623.7 Elongation at break X-Z 50mm/min GB/T 1040.4 % 1.9 Bending strength 2mm/min GB/T 9341 MPa 82.4 Bending modulus 2mm/min GB/T 9341 MPa 2861.7 Charpy Impact strenght 2.75J GB/T 1843 kJ/m2 3.7 Note: All splines are printed under the following conditions: printing temperature=210 ° C, printing speed=80mm/s, base plate 60° C, filling=100%, nozzle diameter=0.4mm
Related
Related