The F30 XL, initially fluid, easily infiltrates into the various orifices of the area to be controlled. The F30 XL is generally used to make large impressions due to its long curing time. The final plastic copy is flexible (final hardness of 30 Shore A), which allows it to resist the stresses and deformations caused by manual extraction of the impression. The F30 XL is recommended for the control of complex internal shapes, however, it should be ensured that the Extraction Stress does not exceed 15%. The impression offers meticulous results, close to the micrometer and to the dimensions of the original part. All the properties of the part (shape, appearance, dimensions, etc.) are reproduced on the impression. Reproduction is not damaged during the extraction process, which ensures accurate results. Inside the part, the F30 XL leaves no trace of its passage. The properties of the F30 XL also allow it to protect or preserve parts, it can also be used as a seal. As with all high volume products, the F30 XL offers a longer than normal setting time (about 10 minutes). This is also the case for its curing time, more or less at 25 minutes. These longer delays allow users to pour the mixture completely before it stiffens.
