These addition-cure silicone mold rubbers are soft to mid-range hardness, high-performance, room temperature curing (RTV) systems offering excellent flexibility and toughness allowing durable molds to be made from relatively simple to the most highly detailed, undercut and complex models.Features Shore A~30 to A~60 hardness liquid mold rubbers High-strength, long mold life formulas Excellent chemical resistance No shrinkage upon cure Reproduces finest detail over and over Can be accelerated for rapid cure Ideal for the most demanding resin casting applications 73-15 Demold Time: 4-5 hours Mix Ratio: 1A to 1B Shore A Hardness: 15 Pour Time: 20 min Color: White Viscosity: 2,500 cP 25 in³ / lb 73-25 Demold Time: 4-5 hours Mix Ratio: 1A to 1B Shore A Hardness: 25 Pour Time: 15 min Color: Green Viscosity: 6,000 cP 24.3 in³ / lb 73-45 Demold Time: 16 hours Mix Ratio: 1A to 10B Shore A Hardness: 45 Pour Time: 60 min Color: Green Viscosity: 35,000 cP 21.3 in³ / lb PlatSil 73-15 is a super (we mean super) low viscosity (2500 cP) platinum silicone mold rubber that is clear/translucent and offers an easy, 1:1 mix ratio. It is a Shore A~15 hardness, making it quite soft and flexible for the most itricate and delicate mold making requirements. Since it is a platinum silicone mold rubber, it does not shrink on cure and should be tested for cure inhibition against any surface before a project is undertaken. PlatSil 73-15 has a 15 minute working time and is able to be demolded in 4-5 hours at ~75F/25C.PlatSil 73-25 is a 1:1 mix platinum/addition-cure silicone that cures to a soft/mid-range hardness of A~25. This silicone is a blend of all the best properties available for a silicone mold rubber. PlatSil 73-25 is 1A:1B, by volume, so no scale is needed. The yellow colored Part A and green colored Part B make it easy to see when mixing is complete. A uniform, light, lime-green color means you're good to go! A mixed viscosity of 6,000 cP is easy to mix and pour and insures vacuum degassing is unnecessary. A 15 minute pour time coupled with a 4-5 hour demold time is the best of both worlds! PlatSil 73-25 does not shrink on cure and the resulting mold has great tear strength and easy release from all casting media.PlatSil 73-45 is a 1A:10B mix, mid range hardness (A~45), low viscosity, platinum silicone mold rubber. Great for making molds for all types of resin casting (polyurethane, polyester, epoxy) and foams without release agents. Used for prototyping, model making, high density polyurethane foam casting, and much more. Long mold life, high-performance, great chemical resistance and no shrinkage on cure. A very popular rubber for casting foam architectural millwork, pots, plaques and other foam decor items. Pour as supplied or thicken for brush-on molds using PlatThix liquid thickener.
