Polyvine Stone and Brick Protector is a high performance water-based product that is absorbed into porous surfaces and forms a barrier to water, moisture, grease, oil acid, alkali and salts. It also suppresses mould and fungal growth and the formation of salts on natural masonry surfaces. It is UV resistant and leaves a dead flat, natural finish. Before use ensure that the surface is clean and free of grease or any other potential contaminants. Mix the product well but do not shake and apply by brush, spray or roller. For general use on masonry, brickwork and stone, one coat will usually be enough. There is potential for a chemical reaction to take place if this product comes into contact with glass, lead or aluminium, so mask off such areas first. If there is any contact rinse thoroughly with water immediately. * Please note that this product should not be used in temperatures below 5°C or in very high humidity. SPECIFICATIONS: No. of coats: 1 Coverage: 15-20 square metres per litre (depending on substrate) Drying time: 15 mins - 1 hour depending on temperature Sizes: 1 litre / 4 litre Clean up: Water SAFETY DATA SHEET DOWNLOAD PRODUCT DATA SHEET DOWNLOAD
