Image transfer paper for polymer clay (water-soluble) Do not use with FIMO SOFT. Sculpey works great. Size: about 13cm x 13cm / 5” x 5” Storage: Keep the paper dry and store it in a cool, moisture-free place. Keep the paper in a flat place to avoid any wrinkles. ⭐️ How to use: 1- Condition your clay and roll it preferably on a ceramic or marble tile 2- Place the transfer paper on the clay (colours facing the clay). You can cut the paper to the desired size. 3- Firmly roll the paper on the clay with your rolling pin. 4- Add water on top of the paper: either by running cool water from your sink directly (low pressure), or by using a bottle and pouring it on the top. 5- Wait a minimum of 15 minutes for the ink to transfer and the paper to dissolve. 6- Remove the excess paper gently with your fingers. If you have leftover paper on your clay, avoid using toilet paper or any thin paper that breaks when it comes into contact with water. Instead, you can either bake it with the excess and remove it afterwards, or place the ceramic tile under your tap and run water (low-pressure). 7- Once your slab is dry, you can cut and bake your clay as usual. 8- Always seal your finished pieces either with UV resin or a varnish. ⭐️ Have fun! Don’t hesitate to email me if you have any questions ([email protected]). Tag me on Instagram, I would love to see and share the beautiful jewellery you create with my transfer papers ❤️
