PoolGuard DAPT-2 – Pool Door Alarm Product Overview The PoolGuard DAPT-2 is a pool safety door alarm designed to alert homeowners when a door leading to the pool area is opened. It helps meet common pool barrier and safety-code requirements by providing an immediate audible warning when unauthorized access occurs. Key Features Loud alarm signal (approximately 85 dB) for clear, immediate notification. Adult pass-through feature allows temporary entry without triggering the alarm. Low battery warning alarm to ensure ongoing safety performance. Uses a 9-volt battery (typically one-year battery life under normal use). Designed for doors providing direct access to a pool or spa area. Technical Specifications Part Number: DAPT-2 Power Source: 9-volt battery Alarm Delay: Approximately 7 seconds before horn activation when door is opened Compliance: Meets typical water-hazard entrance alarm requirements Mounting: Wall-mounted alarm unit with door and frame sensor components Applications & Compatibility This alarm is suitable for installation on any door that opens directly to a swimming pool or spa area. It is commonly used to meet residential safety barrier requirements and provides an added layer of protection for children or unauthorized access. Installation height and configuration should follow local safety codes. Installation Instructions Mount the alarm unit at least 54″ above the inside floor level. Install the magnet and switch sensors on the door and frame, ensuring proper alignment and spacing. Insert the 9-volt battery and secure the alarm unit to the wall. Test the system by opening the door and confirming that the alarm activates after the delay period. Troubleshooting No alarm when door is opened: Check battery installation, ensure sensor alignment and verify proper spacing. False alarms: Recheck magnet and sensor spacing, confirm mounting is secure, and ensure door closes fully. Weak or intermittent horn: Replace the battery and inspect sensor wires and mounting hardware. Maintenance Tip Test the alarm weekly to ensure proper function. Replace the battery yearly or whenever a low-battery alert is heard. Keep sensor components free of debris and ensure the magnet remains aligned for consistent performance.
