The Portable Hexagonal Shaped Firewood Rack is a decorative metal log holder for fireplaces, cabins, garages, and covered outdoor hearth areas. Its hexagonal frame gives the wood stack a geometric outline, while the portable format helps move split logs from storage area to hearth without rebuilding the stack by hand. Built from powder-coated galvanized metal, the rack holds up in indoor rooms, garages, covered patios, and outdoor fireplace zones. The shaped frame works well when firewood storage should feel useful and visually intentional. For similar sculptural holders, see Decorative Firewood Racks. Why It Works Built-in handles eliminate the log-carrier step: Integrated handles let you lift and carry the loaded rack between covered porch and hearth, so you can skip the separate canvas log carrier and reduce one trip per burn cycle. Hexagonal column reads as sculpture, not utility: Six-sided geometric form pairs with modern, geometric, and architectural interiors where rectangular racks read as too utilitarian for a styled living room. Three compact sizes for evening burn cycles: 22-inch holds enough for an evening fire; 30-inch handles a long winter weekend. Sized for indoor use rather than full-season wood-pile storage. Checked before packing: Edges, coating, and hardware fit are reviewed before shipment so the product arrives ready for standard home installation. Key Specs Dimensions: Three sizes (H × D): 22 × 12 in / 56 × 30 cm; 26 × 12 in / 66 × 30 cm; 30 × 12 in / 75 × 30 cm. Capacity: Standard fireplace-cut split logs in a hexagonal column; the largest size accommodates approximately 12-18 logs Material: powder-coated galvanized metal, hexagonal cylindrical frame with integrated carrying handles Finishes: Black, White, Gold Weight: From about 2.5 kg / 5.5 lb at the smallest size Mounting: Free-standing and portable, no mounting hardware required; lightweight enough to relocate between fireplace and storage spot. Placement: Living room hearth, fireplace nook, covered porch; relocates easily What's Included Free-standing portable hexagonal firewood rack (size and finish as ordered) Care instructions How to Use and Install Place the unit flat on the floor next to the fireplace or hearth on a level surface. Load split firewood across the open rack, keeping logs centered. The lightweight frame and compact footprint make it easy to relocate from fireplace nook to porch or garage as needed. No tools or mounting hardware are required. Care Wipe the powder-coated galvanized metal with a soft, dry cloth to remove dust and bark debris. For deeper cleaning, a damp cloth with mild non-abrasive cleaner works; avoid abrasive cleaners or chemical solvents that can dull the powder-coat finish. Designed for indoor placement next to the fireplace or hearth; covered porch use is acceptable on a flat, level surface. Rinse off any salt-spray and wipe dry. The powder-coated galvanized metal finish is rust-resistant and water-resistant, and is suitable for covered outdoor use in indoor rooms, garages, covered patios, and outdoor fireplace areas. Wipe the surface clean after heavy exposure and follow any model-specific mounting or care guidance. Frequently Asked Questions How many logs does it hold? Designed for standard fireplace-cut split logs in the 12 to 16 inch length range. The smallest 22-inch unit holds approximately 6 to 9 split logs; the 26-inch holds around 8 to 12; the largest 30-inch holds approximately 12 to 18 split logs depending on log diameter. Stack vertically inside the hexagonal column for good fit. Can I lift and carry it when fully loaded? Yes. The integrated handles are sized for two-handed lifting. A fully loaded smallest size weighs approximately 25 to 35 pounds; the largest reaches 50 to 70 pounds depending on log moisture and density. Distribute logs evenly inside the column before lifting, and bend at the knees for heavier loads. Where can I place it indoors and outdoors? Designed primarily for indoor placement next to the fireplace or hearth on a flat, level floor. The portable design also makes it suitable for covered-porch staging in dry weather; relocate before rain or heavy weather. The powder-coated galvanized metal finish is rust-resistant and water-resistant, and is suitable for covered outdoor use in indoor rooms, garages, covered patios, and outdoor fireplace areas. Wipe the surface clean after heavy exposure and follow any model-specific mounting or care guidance. How do I match the finish to existing decor? Black works with matte-black, chrome, and modern monochrome interiors; White suits Scandinavian, neutral, and minimalist palettes; Gold complements warm metallic accents, brass hardware, and warm metallic or transitional decor. Match the firewood rack finish to fireplace tools, fender legs, or hearth accessories for the most cohesive look. How do I clean the firewood rack? Wipe the powder-coated galvanized metal with a soft, dry cloth or microfiber to remove dust and bark debris. For sticky spots, a damp cloth with mild non-abrasive cleaner works; avoid abrasive scouring pads or chemical solvents that can dull the powder-coat finish over time. Rinse off any salt-spray promptly.
