Designed specifically for the growth and flowering of plant varieties with a hybrid flowering time of 8 weeks or more. Its formula provides optimal development throughout the growth stage to obtain greener, stronger and more resistant plants. Without adding other components throughout the cycle, the nutrients are provided in the correct ratio for easy absorption, ideal for intermediate flowering plants. Green House Powder Feeding can be used on all media. However, the fertilizer schedule is slightly different, and if you are using something other than soil, we recommend using a PH and EC meter to achieve the desired values and have full control over your feeding solution. For beginnersIf you are growing in over-fertilized soil, we recommend using powder feeding 2-4 weeks after planting the seeds and starting with a mild solution (0.25 g per liter).In the vegetative phase, you can increase the solution up to 0.5 g per liter.At the beginning of flowering, slowly increase the amount of fertilizer until you reach 1g per liter.If you follow this guide. You will easily get through and achieve a good yield. For experienced growersExperienced growers usually measure their feeding solution to give their plants the exact amount of nutrients and the correct pH of the solution.Whether you are growing in coco, hydroponics or aeroponics – with all these systems you need to measure your pH and EC values.When you use a pH and EC meter, you can optimize your growth and achieve much better results. Steps for mixing the nutrient solution:1. a) Check the pH and EC value of the water and make sure the temperature is around 18-22 degrees Celsius. You should also check if your water contains enough calcium.1. b) If your EC is 0.0 (using RO or rainwater) you need to add calcium to your water before adding the powder feed. Make sure your EC rises up to 0.3-0.4 EC2. Add the powder feeding and mix well for 2-3 minutes, then measure the EC value. Repeat if necessary until you reach the desired value.3. Once you have reached the desired EC value, wait for 15-30 minutes.4. Then measure the PH and adjust if necessary with PH up or PH down – mix well for 2-3 minutes and wait again 15-30 minutes before measuring.5. Once you have reached the desired values, feed your plants.
