Powell Peralta recycled deck wall hanger assorted graphics from Powell Peralta decks One roughly 3"x3" cut (sizes will vary) of a Classic Powell Peralta 7-ply maple skateboard deck with hand-sanded rails and pre-drilled, countersunk holes. two 3" long #10-32 black Phillips head bolts two #10-32 black hex flange nuts two #10-32 black acron nuts one #8 x 1 1/2" black Phillips head screw one Fischer Duopower 5x25 conical plastic wall anchor Assembly is required. The countersunk bolt holes are carefully designed to fit snugly, preventing any sagging under the weight of the display deck. Due to the tight fit, you may notice minor splintering on the surface of the hanger when inserting the bolts. To minimize this, we recommend using a power drill to start the assembly process. Once the bolt is anchored, finish tightening it by hand to reduce splintering and ensure the bolt is aligned properly. Misaligned bolts can make attaching your deck more difficult and increase the risk of scratching. We recommend using a 3/16" drill bit to install the wall screw. Made in the USA
