Revolubes™ PM Engine FlushClean engine. Restored power. Fresh start. Revolubes Power Machinery - Engine Flush is our advanced detergent-based cleaning formula designed to restore cleanliness where heat, friction and pressure work every single second. It quickly dissolves sludge, varnish and carbon build-up deep inside the lubrication system - safely and efficiently - bringing oil flow and performance back to where they should be. What truly sets it apart: the formula is engineered to prepare metal surfaces for chemical bonding with our lubricants based on Modified Active Calcium Sulphonate Complex (MACSC) technology. In other words, the flush doesn’t just clean — it sets the stage for the protective layer that forms once you refill the engine with fresh oil. And unlike many traditional engine flushes, Revolubes™ Engine Flush contains no kerosene and no petroleum-derived solvents that can break down the oil or weaken its film. Instead, it uses a specialised low-viscosity cleaning base designed to protect the lubrication system even under load. Add it, start the engine, take a short drive — that’s it. The formula provides its own lubrication, making the entire process completely safe. Suitable for - Petrol and diesel engines - Turbocharged and naturally aspirated units - Mineral, synthetic, semi-synthetic and low-SAPS oils - Engines with hydraulic control systems (VVT, variators, hydraulic lifters) - Motorbike engines with a wet clutch. Why choose Revolubes™ Engine Flush? Performance - A quieter, smoother-running engine, especially on cold starts. More stable throttle response and improved drivability. A restored lubrication circuit with proper oil flow and faster stabilisation of oil pressure after the change. Activation - Prepares metal surfaces for strong chemical bonding with MACSC-based Revolubes Tribo Shield additives. Versatility - Engineered to work under real operating conditions across petrol and diesel engines, turbo and non-turbo. Compatible with mineral, synthetic, semi-synthetic and low-SAPS oils. Supports modern hydraulic systems including VVT, variators and hydraulic lifters. Safety - Non-petroleum carrier base that protects the lubrication system during operation. No kerosene. No cheap solvents. No compromise. Lubricative properties built in, ensuring the engine stays protected throughout the flushing process. Efficiency - A clean lubrication system reduces the risk of failures caused by restricted oil channels. Fewer issues with stuck rings or unstable oil pressure. Longer life for your fresh oil. Improved overall engine efficiency - often resulting in 3–5% lower fuel consumption. Speed - Quickly dissolves deposits and restores oil flow with minimal downtime. Designed to work within a short, real-world driving cycle (10–20 km). Fast preparation of metal surfaces for optimal bonding with MACSC technology. Cleanliness - Dissolves sludge, varnish and carbon deposits that restrict oil channels and reduce performance. Disperses both oil-soluble and non-soluble contaminants so they are removed with the drained oil. Frees stuck piston rings, lifters and VVT components for smoother operation. Penetration - Low-viscosity carrier base reaches deep into narrow oil channels and tight engine components. Ensures thorough contact with deposits in hard-to-reach areas. Maximises the effectiveness of the cleansing and preparation process. How to apply Revolubes Engine Flush 1. Add the flush to warm engine oil. 2. Start the engine and drive 10–20 km. 3. Drain the oil and replace the filter. 4. Refill with fresh oil — and enjoy the clean start. For more details, please visit the instructions. Economic Value A clean lubrication system means: lower risk of failures caused by restricted oil channels, fewer issues with stuck rings or unstable oil pressure, longer life for your fresh oil, improved engine efficiency — often resulting in 3–5% lower fuel consumption. Revolubes™ Engine Flush - a small investment that delivers a big difference. *Label design may vary.
Related